Alpine CDE-HD149BT owner manual 55-EN

Page 55

Rear USB Terminal

Connect this to a Flash Memory or an iPod/iPhone (sold separately).

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

Note

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Illumination Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of this unit to dim whenever the vehicle’s lights are turned on.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Right Front (+) Speaker Output Lead (Gray)

Right Front (−) Speaker Output Lead (Gray/Black)

Right Rear (−) Speaker Output Lead (Violet/Black)

Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (−) Speaker Output Lead (Green/Black)

Left Front (−) Speaker Output Lead (White/Black)

Left Front (+) Speaker Output Lead (White)

Antenna Receptacle

Front Output RCA Connectors RED is right and WHITE is left.

Rear Output RCA Connectors RED is right and WHITE is left.

Subwoofer Output RCA Connectors RED is right and WHITE is left.

SiriusXM Tuner connector Connect to SiriusXM Tuner.

Steering Remote Control Interface Connector

To steering remote control interface box.

You can operate this unit from the vehicle’s control unit when an Alpine Steering Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

MIC Input Connector To Microphone.

Fuse Holder (10A)

Power Supply Connector

Microphone (Supplied)

Rear Aux Input Connector (Black)

This connector allows for input of audio from an external device (such as a portable player), using a commercially-available converter cable.

RCA Extension Cable (sold separately)

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

55-EN

Page 54 Page 56
Image 55
Page 54 Page 56
Contents CDE-HD149BT Alpine Electronics France S.A.R.L Contents Setting the Bluetooth sound quality Playing MP3/WMA/AAC Data Play ModePairing a Bluetooth compatible device with Pairing a Bluetooth compatible device withoutReceiving and Tuning to an Alert Installation and ConnectionsFailure to do so may result in fire or electric shock Doing so may result in an accident, fire or electric shockCD and you may not be able to play it again To customers using CD-R/CD-RWIrregular Shaped Discs Unit can play back mp3, wma or m4a file extensions Protecting the USB connectorDetaching Accessory ListTurning Power On and Off Source SelectionInitial System Start-Up Adjusting VolumeLowering Volume Quickly Setting the Time and CalendarListening to Radio Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsStoring the tag information Frequency Search FunctionReceiving a Multicast Station Multicast Station SearchPress yOPEN About the Feature LogosPlayback 13-ENFolder/File Name Search Concerning MP3/WMA/AAC Repeat PlayX. Random Play Searching for CD Text15-EN About MP3/WMA/AAC16-EN VolumeDefeat TerminologySetting the Source Volume Level Audio SetupEqualizer Presets Factory’s EQ Adjusting the Parametric Equalizer Curve Parametric EQTurning Subwoofer ON/OFF Setting the Subwoofer PhaseSetting the Subwoofer System Setting the Media Xpander mode MX SetupAdjusting the Crossover Settings X-Over Setting the Time Correction Unit TCR ParameterAdjusting the Time Correction T.Correction Adjusting Spatial20-EN About Time CorrectionExample 1 Front Left Seat Example 2 All Seats200 Hz About the Crossover21-EN 20 Hz22-EN Displaying the TextPress kVIEW 23-EN Option Menu SettingAbout the indication display About TextApplying TuneIt Adjusting the sound via Smartphone Setting item Make sure the unit is powered onPress and hold VSOURCE for at least 2 seconds Receiving Notification Ready on future updatePress r to return to the previous mode Facebook Notification FunctionDisplay Setting General SettingTuner Setting Application Setting APP IPod&USB Setting29-EN Setup Before UsingAbout Bluetooth Before Using Bluetooth FunctionPairing a Bluetooth Device from the unit Setting the Bluetooth Connection BluetoothSetting the Bluetooth Device Setting the Visible ModeSetting the Phone Book Update Setting the Bluetooth sound qualityChanging the Phone book List Order Hands-Free Phone Control Calling Bluetooth Audio Operation Selecting the desired Group Folder Recalling the Bluetooth Audio ModePausing Selecting the desired SongPress 1 or 2 to select the desired Folder Searching for a desired SongSelect Folder 36-EN37-EN Setting the iPod ControlConnecting an iPod/iPhone Press VSOURCE to switch to the iPod modeRefer to Random Play Shuffle M.I.X. on Press ENTER to activate the search selection modeDirect Search Function 38-EN39-EN Alphabet search functionRandom Play Shuffle M.I.X Change Playlist/Artist/Album/Genre/ Composer/EpisodeOnly alphanumeric characters Ascii can be displayed Listening to Pandora40-EN To skip to the next song, press Creating a New Station Thumbs FeedbackQuickMix Searching for a Desired StationSiriusXM Tuner operation Changing the DisplayReceiving Channels with the SiriusXM Tuner 42-ENManaging Artist and Song Alerts SiriusXM SettingSetting the Favorite Sports Team Alerts Setting the Parental Control44-EN Storing Channel PresetsTuning Channels using Presets Confirming the strength of the SiriusXM signalUsing Jump Memory and Jump Recall function Receiving and Tuning to an AlertSearch Function 46-EN Replay FunctionParental Lock Function Storing iTunes Tagging informationCase of Difficulty SiriusXM Advisory Messages Indication for Flash Memory Error-01Indication for iPod Mode Bluetooth modeYou have not created any personalized Pandora Stations Indication for Pandora Mode No Pandora49-EN Buffer for Replay is full50-EN Specifications51-EN Installation and ConnectionsPull the unit out, keeping it unlocked as you do so InstallationRemoval 52-ENRemove Flash Memory Mounting the MicrophoneIPod/iPhone Connection sold separately Remove the iPod/iPhone54-EN Connections55-EN  You must supply proof of your purchase of the product This Warranty does not cover the followingQue pueda causar su operación no deseada USA/CanadaAuthority to operate the equipment México

CDE-HD149BT specifications

The Alpine CDE-HD149BT is an advanced car stereo receiver that seamlessly integrates modern technology with superior audio quality, designed for music enthusiasts who demand both functionality and aesthetics. With its sleek design and user-friendly interface, this model is a great addition to any vehicle.

One of the standout features of the CDE-HD149BT is its extensive compatibility with various media formats. It supports CDs, DVDs, USB drives, and even Bluetooth connectivity, allowing users to enjoy their favorite tracks from different sources. Its built-in Bluetooth allows for hands-free calling and audio streaming, ensuring that drivers can stay connected while keeping their focus on the road.

The receiver also includes a built-in HD Radio tuner, which provides improved sound quality and access to hundreds of additional radio stations. This feature allows users to experience crystal-clear audio without the interference typically associated with traditional AM/FM broadcasts. For those who crave custom sound settings, the CDE-HD149BT offers a 9-band graphic equalizer, allowing users to adjust frequencies to their liking for a personalized listening experience.

Another notable technology in the CDE-HD149BT is its compatibility with Alpine's "iPersonalize" portal, enabling users to tailor their sound system's performance according to their vehicle's acoustics. This feature is particularly useful for audiophiles looking to optimize their sound environment.

The CDE-HD149BT features a vibrant display that presents information clearly, making it easy to navigate through playlists, incoming calls, and settings. The unit's intuitive controls, including a responsive rotary dial, enhance the overall user experience, making it simple to adjust volume or switch tracks without distraction.

Moreover, the CDE-HD149BT comes equipped with multiple preamp outputs, allowing for easy connectivity to external amplifiers and subwoofers. This ensures that users can expand their audio system to achieve deeper bass and richer sound quality.

In conclusion, the Alpine CDE-HD149BT is a versatile car stereo that combines high-fidelity audio performance with modern connectivity options. With its user-friendly features, intelligent design, and a range of customization options, it's an ideal choice for those seeking a premium in-car audio experience. Whether commuting or embarking on a road trip, this receiver offers the tools you need to enjoy your music to the fullest.
Top Page Image Contents