Alpine CDA-9856 owner manual SAT Radio Receiver Optional, Checking the SAT Radio ID Number, 19-EN

SAT Radio Receiver (Optional)

Rotary		SOURCE/
encoder		POWER
	/		BAND MENU

MODE	FUNC. Preset buttons TITLE
	(1 through 6)

SAT Receiver: XM or SIRIUS Receiver

When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time.

Receiving Channels with the SAT Radio Receiver (Optional)

About SAT Radio

Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM’s website at www.xmradio.com., or SIRIUS’ website at www.sirius.com.

To receive SAT Radio, the separately sold XMDirect™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer.

*XM and its corresponding logos are trademarks of XM Satellite Radio Inc.

*SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc.

•The SAT Receiver controls on the CDA-9856 are operative only when a SAT Receiver is connected.

1Press SOURCE/POWER to select SAT Radio mode.

2Press BAND to select between one of the three SAT Radio Preset Bands.

Each press changes the band:

XM mode:

XM1 XM2 XM3 XM1

SIRIUS mode:

SR1 SR2 SR3 SR1

3Press or to select desired category.

4Press or to select the desired channel.

Holding down or will change channels continuously.

•When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control.

1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.

2Press ENTER on the remote control within 5 seconds to receive the Channel.

If the channel number is 3 digits, the Channel is automatically received after the channel number is input.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.

This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver.

It can also be displayed on the screen of the CDA-9856 in the following way.

XM:

1While receiving a SAT Radio band, press or

to select channel “0” for XM.

The unit alternately displays “CH 00” or “RADIO ID” for 2 seconds, then the ID number for 10 seconds.

While displaying “RADIO ID” as shown above, Demonstration (page 17) become nonfunctional.

2To cancel the ID number display, set the channel to other than “0.”

SIRIUS:

1While receving a SAT Radio band, press or

to select channel “255” for SIRIUS.

2Press TITLE until the ID No. appears in the display.

CHANNEL No. CATEGORY NAME CHANNEL NAME

ID No. ID No. COMP NAME CLOCK CHANNEL No.

3To cancel the ID number display, set the channel to other than “255”.

•You cannot use “O,” “S,” “I,” or “F” for the ID Number (XM radio Receiver only).

•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.

Setting the Tuning Method

You can set the tuning method. You can select the received stations in channel No. order or in channel name order (alphabetic order).

To customers using the SIRIUS Tuner Box:

For details about functions, refer to the SIRIUS Tuner Box Owner’s Manual.

1Press MENU to select the SETUP mode, then press MODE.

2Press or to select “CH SELECT,” then press MODE.

19-EN