Alpine CDA-9856 Installation, 30-EN, Accessory List, Install the detachable front panel Removal

Page 32

Installation

2

Screw

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the detachable front panel.

If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in

Hex Nut (M5)

*2

Metal

Mounting

Strap *1

Ground Lead

Bolt Stud

this unit

place.

Accessory List

 

•

Head unit

1

•

Power cable

1

•

Mounting sleeve

1

•

Carrying case

1

•

Bracket key

2

•

Screw (M5x8)

4

•

Owner’s Manual

1 set

•The main unit must be mounted within 35 degrees of the horizontal plane, back to front.

Less than 35°

1Mounting Sleeve (Included)

Dashboard

this unit

Remove the Detachable Front Panel (refer to

page 6). Slide mounting sleeve from main unit (see “Removal” on page 30).

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis.

•For the screw marked “*2”, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9856. Connect all other leads of the CDA-9856 according to details described in the CONNECTlONS section.

3Slide the CDA-9856 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.

Install the detachable front panel.

Removal

1.Remove the detachable front panel.

2.Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.

This unit

Bracket keys (Included)

3. Pull the unit out, keeping it unlocked as you do so.

30-EN

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CDA-9856 Alpine CD Changers Give You More CHM-S630 CHA-S634 CHA-1214Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Turning Power On and Off Press SOURCE/POWER to turn on the unitGetting Started About the alphanumeric display of this unitAdjusting Volume Lowering Volume QuicklySetting Time Initial System Start-UpManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations RadioPlayback Switching the HD Radio signalFrequency Search Function 10-EN Repeat PlayX. Random Play Searching from CD Text File/Folder Name Search Concerning MP3/WMAQuick Search About MP3/WMATerminology 12-ENLeft and Right/Fader Between Front Rear/Defeat Sound SettingSetting the Bass Control Setting the Treble Control Setting the BBE ModeSetting the Treble Center Frequency Setting the Treble Level15-EN Other FunctionsDisplaying the Text Displaying Time 16-ENAbout Text Press Title repeatedly until the time is displayed17-EN Sound CustomizingVisual Customizing External Device 18-ENSetting the Tuning Method SAT Radio Receiver OptionalReceiving Channels with the SAT Radio Receiver Optional Checking the SAT Radio ID NumberStoring Channel Presets Receiving Stored ChannelsCategory/Channel Search Function Quick Search FunctionSetting the Auxiliary Data Field Display Changing the Display21-EN XM or Sirius mode, press TitleIPod Optional Searching for a desired SongSearching by Playlist Searching by artist nameSelect Playlist/Artist/Album Searching by album nameSearching by song name 23-ENRandom Play Shuffle M.I.X 24-ENChanger Optional Playing MP3 Files with the CD Changer OptionalControlling CD Changer Optional Multi-Changer Selection OptionalInformation Case of Difficulty27-EN Indication for SAT Receiver ModeIndication for CD Changer 28-EN SpecificationsIndication for iPod Mode Installation and Connections 29-ENInstallation Accessory ListInstall the detachable front panel Removal 30-EN31-EN Japanese CARConnections 32-EN33-EN Page
Top Page Image Contents