Basic Operation |
|
| ||
MODE | INTLZ/DISP | SOURCE | A.PROC | |
| TUNE | DN g | f UP |
|
Setting the AUX Mode |
| Demonstration |
You can input TV/video sound by connecting an optional
1
2 Press the f UP button repeatedly to select "AUX" .
Each press of the f UP button changes the modes as shown:
NOTE
If you press the DN g button the display scrolls in reverse sequence.
→
DEMO ← AUX (AUX Mode Display Setting∗ ) ← SCR ← MUTE ←
∗Displayed after AUX ON is set.
NOTES
• The initial setting at the factory is AUX OFF.
• You can set the AUX mode display by pressing the DN g or f UP button after AUX ON is set, select the AUX mode display setting, and then press the TUNE button.
4 Press and hold the INTLZ button for at least 2 seconds to return to the normal mode.
5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, you cannot select the changer to be used even for a connected changer.
This unit has the Demonstration feature which simulates the display functions on the display panel.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button to select the DEMO mode. Each press changes the modes as shown:
→
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
If you press the DN g button the display scrolls in reverse sequence.
3 Press the TUNE button to turn on or off the DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
If no buttons are pressed 30 seconds after the DEMO mode is turned ON, "DEMO" blinks 3 times in the display. The DEMO mode then begins.
NOTE
The initial setting at the factory is "DEMO OFF."
4 Press and hold the INTLZ button for at least 2 seconds again to return to normal operation.