Alpine CDA-7865R owner manual Turning Emergency Alarm On or Off, Displaying Radio Text

Page 17

4 Press the P. PTY button to activate the PRIORITY PTY mode again.

To change the programme category, perform the step 3.

To disable the PRIORITY PTY function, press the P. PTY button.

NOTE

In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation.

5 Press the "F" button to activate the normal

mode. The FUNC indicator will turn off.

NOTE

Operate the unit while the FUNC indicator is illuminated.

If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.

Turning Emergency Alarm On or Off

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "PTY31" Each press of the f UP button scrolls the modes as shown.

FM-LV REG PTY31 AMBERDIM SUB

DEMOAUXSCRMUTEBEEP

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button repeatedly to select the PTY31 ON or PTY31 OFF mode.

In the PTY31 ON mode, the unit will show "ALARM" in the display when the unit receives the PTY31 (Emergency Broadcast) signal.

4 Press and hold the INTLZ button for at least 2 seconds to activate the selected mode.

Displaying Radio Text

Text messages from a radio station can be displayed.

1 Tune in a radio station that transmits text messages.

2 Press the "F" button. The FUNC indicator illuminates.

3 Press the R.TEXT button to activate the Radio Text mode. The display shows "WAIT" for a few seconds, then starts scrolling the text message. It continues until other operation is performed.

4 To cancel the Radio Text mode, press the R.TEXT button.

5 Press the "F" button to return to the normal operation mode. The FUNC indicator disappears from the display.

NOTES

If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds.

Operate the unit while the FUNC indicator is illuminated.

If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.

15-EN

Image 17
Contents CDA-7865R Alpine CD Changers Give You More Contents Precautions Handling the Detachable Front Panel Basic Operation Turning Power On and OffDetaching the Front Panel Initial System Start-UpAdjusting Volume/Bass/Treble Display Angle Adjustment Turning Loudness On/OffSelecting BBE Mode Fader Between Front and RearChanging Backlighting Colour Adjusting Source Signal LevelDimmer Control Demo ← AUX ← SCR ← Mute ← Beep ←CD Text Scroll Setting Turning Mute Mode On/OffSubwoofer On and Off Sound Beep Guide FunctionDemo OFF Setting the AUX Mode Demonstration→ Tuner → CD → AUX Default values BC 80 Hz BW WIDE1 TC 10.0kHz Adjusting the built -in Audio ProcessorSwitching the Display Modes Radio Operation Manual TuningAutomatic Seek Tuning Auto Station Search While Travelling Automatic Memory of Station PresetsTuning to Preset Stations Recalling Preset RDS Stations Setting RDS Reception Mode and Receiving RDS StationsWhen the RDS station signal received has become weak Press the AF button to deactivate the RDS modeReceiving RDS Regional Local Stations PTY Programme Type TuningReceiving Traffic Information → Light M → Classics → Other MPriority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Displaying Radio Text Turning Emergency Alarm On or OffOpening and Closing the Movable display CD Player OperationPlayback Press the c button Movable display will openFast Forward and Backward Music Sensor SkipRepeat Play X. Random PlayAbout Title and Text Displaying the Title/Text Titling DiscsControlling CD Changer Optional When a 12-disc CD Changer is connectedErasing Disc Title Searching for Titled Discs CD Changer only Multi-Changer SelectionControls on Remote Control Remote Control OperationPress the switch to turn the power on/off Press the button to change to the CD changer operationBattery Replacement Case of Difficulty InformationNo Magzn FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationISO Antenna Convertor Plug ConnectionTo prevent external noise from entering the audio system 30-EN