Subwoofer On and Off, Sound Beep Guide Function

Press and hold the INTLZ button for at least 2 seconds.

Subwoofer On and Off

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "SUB."

Each press of the f UP button changes the modes as shown:

→FM-LV → REG → PTY31 → AMBER → DIM → SUB

DEMO ← AUX ← SCR ← MUTE ← BEEP ←

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between SUB-W ON and SUB-W OFF.

If an Ai-NET compatible processor with Subwoofer output is connected:

Press the TUNE button after selecting the SUB-W ON mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°).

4 Press and hold the INTLZ button for at least 2 seconds after setting the SUB-W ON.

5 Press the MODE (Audio Control) knob repeatedly to select the SUB-W mode.

→

SUB-W

BAS

TRE

BAL

VOL ←

FAD

←

6 Rotate MODE (Audio Control) knob until the desired sound is obtained in each mode.

Sound (Beep) Guide Function

This function will give audible feedback with varying tones depending upon the button pressed.

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "BEEP."

Each press of the f UP button changes the modes as shown:

NOTE

If you press the DN g button the display scrolls in reverse sequence.

→FM-LV → REG → PTY31 → AMBER → DIM → SUB

DEMO ← AUX ← SCR ← MUTE ← BEEP ←

3 Press the TUNE button to toggle the mode between BEEP ON and BEEP OFF.

NOTE

The initial setting at the factory is BEEP ON.

4 Press and hold the INTLZ button for at least 2 seconds to set the selected mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.

2 Press the f UP button to select the MUTE mode. Each press changes the modes as shown:

→FM-LV → REG → PTY31 → AMBER → DIM → SUB

DEMO ← AUX ← SCR ← MUTE ← BEEP ←

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or off the Mute mode.

Each press toggles between the MUTE ON and OFF modes.

NOTE

The initial setting at the factory is "MUTE ON."

4 Press and hold the INTLZ button for at least 2 seconds again to return to normal operation.

CD Text Scroll Setting

This CD player has the ability to scroll the disc and track name recorded on CD-Text discs. The scrolling feature will work with names greater than

8characters.

1Press and hold the INTLZ button for at least 2 seconds.

2Press the f UP button repeatedly to select "SCR".

Each press of the f UP button changes the modes as shown:

→FM-LV → REG → PTY31 → AMBER → DIM → SUB

DEMO ← AUX ← SCR ← MUTE ← BEEP ←

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to toggle mode between SCR AUTO and MANU.

•SCROLL AUTO: the display of CD text is scrolled continuously.

•SCROLL MANUAL: the display is scrolled only when a disc is loaded or when a track is changed.

4 When the setting is completed, press and hold the INTLZ button for at least 2 seconds to return to the normal mode.

NOTES

•Initial mode is "SCR MANU".

•The unit scrolls only CD text names. The disc titles input manually (refer to page 18) cannot be scrolled.

7-EN