Alpine CDA-7865R owner manual Erasing Disc Title, Controlling CD Changer Optional

5 Repeat the steps 3 and 4 above to complete the titling. Pressing the MODE (Audio Control) button after entering the eighth character, automatically stores the title into memory.

When entering a title of less than 8 characters (for example, 3 character title):

After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title.

6 Press and hold the TITLE button for at least 3 seconds to record the title.

NOTES

•The memory capacity for the disc titles is 18. If you try to store beyond the limit, the display will show "FULL DATA." At this point, no more titles can be stored.

•To input a new title, one of the previously inputted titles must first be deleted.

•When you want to erase a title, enter the " " symbol into all spaces.

•The CD Changer title length or memory capacity varies depending upon the model being used.

•Removing power from the unit may delete these titles. Use caution when manipulating the power cord.

Erasing Disc Title

1 Press the TITLE button to select the disc titling mode. Then, press and hold for at least 3 seconds.

2 Press and hold the -/Jbutton for at least 2 seconds to activate the title scanning mode. The title in the display will blink.

3 Press the DN g or f UP button repeatedly unitl the disc title you want to erase is displayed.

4 Press and hold the -/Jbutton for at least 2 seconds to erase the disc title displayed.

5 Press and hold the TITLE button for at least 3 seconds to cancel the disc title erasing mode.

NOTE

You cannot erase a CD-TEXT.

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to the CDA-7865R if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CDA-7865R, the CD Changer will be controllable from the CDA-7865R.

Using the KCA-400C (the Multi-Changer Switching device) multiple changers can be controlled by the CDA-7865R.

See the Multi-Changer Selection section on page 20 for selecting the CD Changers.

NOTES

•The controls on the CDA-7865R for CD Changer operation are operative only when a CD Changer is connected.

•The "Changer" indicator illuminates in the CD Changer mode.

1 Press the SOURCE button to activate the CHANGER mode. The display shows the "Changer," disc number and track number.

NOTE

The source indicator varies depending on the connected source.

2 Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

NOTES

•After selecting the desired disc, you can operate in the same way as for the CDA-7865R CD player.

For details, please see the CD Operation section.

•If the FUNC indicator is illuminated the Disc Select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the "F" button. This changes the "D" indicator to "d." Then press the desired Preset button. With the "F" button activated, the Preset buttons 1 to 6 will represent discs 7 to 12 respectively.

19-EN