Settings/Adjustments
CHANNEL
ENTER
P.EQ
9 Repeat steps 5 to 8 to adjust other bands.
10 To adjust other channels, press the CHANNEL button to return to step 4.
*To compare the factory default settings (DEFEAT ON) with your newly adjusted
parametric equalizer settings (DEFEAT OFF), do the following:
1)While in the adjustment mode, press and hold the P.EQ button for at least 2 seconds.
2)Press the P.EQ button to switch the defeat mode on and off and listen to the difference in the sound.
3)To quit, select the desired setting, then press the ENTER button.
Note that if you press the ENTER button with the defeat mode turned on, the adjustments are reset to the defeat on status (the default values).
11 Once the adjustments are completed, press the P.EQ button.
NOTES
•When the speaker is set to the “OFF” mode, the parametric equalizer for that speaker is ineffective. Refer to “Setting the speakers” (page 4).
•It is not possible to adjust the frequencies of adjacent bands within 7 steps.
•Check the playable frequency ranges of the connected speakers before making the equalizer adjustments. If the speaker's playable frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers.
•After making the settings, we recommend storing them in the memory. For instructions, see page 28.
•When parametric EQ is adjusted, the adjustment for graphic EQ becomes ineffective.