Installation and Connections
Attaching the monitor and stand (for European customers only)
•For customers in other countries: The stand is not included.
3 Check the sticking position.
1Temporarily fasten the stand with gum tape.
2Loosen the adjustment screws, and adjust to a safe, viewable position.
CAUTION
Do not install the monitor near the front
passenger seat air bag system.
1 Remove the main unit attachment fitting.
Pull this part to release.
The fixed arm tilts towards the seat side.
Angle adjustment screw
Seat side | Front glass side |
Main unit
Main unit attachment fitting
2 Loosen the main unit attachment fitting with a coin etc., slide it into the track on the rear of the main unit and temporarily fasten it. Then fix it to the
Line of sight
Dashboard
If the main unit invades your line of sight then it will block your view.
stand.
Slide in an upward direction.
In order to use safely, attach to the following places.
•Stable and secure places.
•Places that will not have your view blocked by the main unit when driving.
•Places that you will not hit against if you lean forward while you wearing your seatbelt.
•Places where the main unit cannot hit against the steering wheel while driving.
•Be aware that if the surface of the dashboard is leather, wooden
panel, stretched fabric or any
•Do not place the main unit directly in front of the air conditioner vents.