Basic Operation
Switching the Screen Position
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISP |
|
| POWER | ||||
|
|
|
| SELECT | |||
|
|
|
|
| Main power | ||
|
|
|
|
| |||
|
|
|
|
| lamp | ||
Screen Display ON/OFF
1 Press the POWER button.
2 To turn off the POWER, press the POWER button again.
•If properly connected, the monitors main POWER will turn off when the vehicle's ignition switch is off. If the main power lamp illuminates in the STAND BY mode, the vehicle's battery may be discharged.
•After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.
•Under cold temperature conditions, the screen may lose contrast temporarily. After a short
Adjusting the Volume
1 Adjust the volume level by pressing the 
or 
button.
Switching the Source
1 Press the SELECT button.
Each press of the button will cycle through the modes as follows:
AUX1
AUX2 
NAV. (NAVIGATION)
If the screen is out of position when, for example, navigation system is connected to the AUX IN 1 or AUX IN 2 terminal by using the RCA extension cable, switch the screen position.
1 Switch the mode to AUX1 or AUX2 to display the navigation screen.
2 Press and hold the DISP button for at least 2 seconds.
Press and hold the DISP button again for at least 2 seconds to return the position.