Alpine TME-M710 owner manual

Page 8

qBeep tone setting (BEEP)

ON : Beep tone sounds to inform you that the operation is accepted, when you press the button etc.

wExternal input sound level adjustment (AUX IN-1 LEVEL/AUX IN-2 LEVEL)

HIGH : Sets the sound level at a high level.

LOW : Reduces the sound level.

eNavigation settings (NAV. IN)

When the navigation is connected to the RGB terminal, set to ON.

rGuide control setting (GUIDE CONTROL)

It is audio interruption setting for the navigation system.

For European customers: Be sure to set to “EUROPE”.

For customers in other countries: Be sure to set to “STANDARD”.

The setting can be made only when ON is set in “e Navigation settings (NAV. IN)”.

3 After completing adjustments, press and hold the SELECT button for at least 2 seconds. The screen will return to the normal mode.

If no operation is made for 10 seconds after selecting a mode to be adjusted, the adjustment mode will be cleared.

7-EN

Image 8
Contents TME-M710 Contents Still Hear Outside Noise While Driving Temperature Fuse ReplacementMaintenance Installation LocationSwitching the Screen Position Adjusting the VolumeSwitching the Source Basic OperationSwitching the display mode AdjustingMonitor Page Remote Control Sensor Base OperationInformation Case of DifficultySpecifications AV Interface UnitInstallation and Connections Do not Damage Pipe or Wiring When Drilling HolesPrecautions Installation Installing AV Interface UnitAttaching the monitor and stand for European customers only Main unit15-EN Connections Basic connection17-EN Page Appendix Français Italiano Name/Nom/Nombre/Nome Home Address/Privatanschrift/Adresse/Dirección/IndirizzoLuftport