Alpine Comprehensive Guide to Stereo Bluetooth Setup for CDE-W233R and CDE-W235BT

AUX mode:

AUX SET*7 VOL LV ADJ*2 DIMMER*3

BT AUDIO mode (CDE-W235BT only):

BT SET*8 VOL LV ADJ*2 DIMMER*3

Phone mode (Non-calling mode) (CDE-W235BT only):

PHONE SET*9 VOL LV ADJ*10 DIMMER*3

Phone mode (Calling mode) (CDE-W235BT only):

SPK SWITCH*11 VOICE MUTE*12 CALL WAIT*13 CALL SOUND*14 END CALL*15 VOL LV ADJ*10 DIMMER*3

*1 The setting items are the same as TUNER setting in SETUP mode. For details, refer to “SETUP” on page 22.

*2 You can individually emphasize or weaken the volume level of the current source to create your own tonal preference. The setting values in Option mode and in SETUP mode are linkage. Refer to “Setting the Source Volume Level” on page 19.

*3 Refer to “Dimmer Control” on page 24.

*4 PLAY MODE can be selected in this mode. For details, refer to “Playing MP3/WMA/AAC Data (PLAY MODE)” on page 24.

*5 Refer to “Setting the iPod Control” on page 33.

*6 The setting items are the same as iPod setting in SETUP mode. For details, refer to “iPod/iPhone Setting” on page 24.

*7 AUX NAME can be selected in this mode. For details, refer to “Setting the AUX NAME Mode” on page 23.

*8 FW VERSION can be selected in this mode. You can see the current firmware version about BLUETOOTH by using this setting.

*9 CALL SOUND, SENDER ID, PB UPDATE, BT MENU, PB ORDER, AUTO ANS, SEV NAME, SPEAKER SL and FW VERSION can be selected in this mode. For details about these settings, refer to “BLUETOOTH SETUP” on page 26.

*10 The Hands free phone talk level, ring tone level and microphone gain level can be adjusted by using this setting. The setting values in Option mode and in SETUP mode are linkage. Refer to “Setting the Source Volume Level” on page 19.

*11 While calling, the call sound can be switched between the unit and mobile phone by using this setting.

This operation can also be done by pressing BAND. Refer to “Call Switching Operation” on page 31.

*12 While calling, and the Voice Mute is activated, the microphone input will mute instantly and “VOICE MUTE” will blink. This operation can also be done by pressing . Refer to “Muting the microphone input quickly (Voice Mute)” on page 31.

*13 If there is a waiting call, select this item to display the caller’s Name and waiting number (1 or 2). Press VIEW and the display will switch.

*14 Refer to “Setting the BLUETOOTH sound quality” on page 27.

*15 Select this item to hang up the call.

SETUP
SOURCE/	AUDIO/SETUP
	/ENTER

Rotary encoder

*The illustration is for CDE-W235BT.

SOURCE/	SETUP
	/ENTER

Rotary encoder

*The illustration is for CDE-W233R.

Setting

You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can be modified.

Use steps 1 to 5 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item.

1Press and hold AUDIO/SETUP (CDE-W235BT only) for at least 2 seconds or press SETUP (CDE-W233R only) to activate the SETUP mode.

2Turn the Rotary encoder to select the desired item, and then press ENTER.

(e.g. Select GENERAL)

AUDIO*1 GENERAL DISPLAY TUNER IPOD 

BLUETOOTH*2

22-EN