Alpine CDE-W233R, CDE-W235BT IPod, Indication for CD Player, Indication for USB Memory, 37-EN

Page 37

iPod

iPod does not play and no sound is output.

•The iPod has not been recognised.

–Reset this unit and the iPod. Refer to “Initial System Start-Up” on page 9. To reset the iPod, refer to the Owner’s Manual of the iPod.

Indication for CD Player

•No CD is inserted.

–Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

–Remove the disc by following these steps: Press the button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

Indication for USB Memory

•A USB device that is not supported by the unit is connected.

– Connect a USB device that is supported by the unit.

NO DEVICE

•A USB Memory is not connected.

–Make sure the USB Memory device is correctly connected and the cable is not excessively bent.

•No song (file) is stored in the USB Memory.

–Connect the USB Memory device after storing songs (files).

• Mechanism error.

1Press the button and eject the CD.

If not ejecting, consult your Alpine dealer.

2When the error indication remains after ejecting, press the button again.

If the error indication still does not turn off after pressing the  button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If the disc cannot be ejected by pressing , press the RESET button (Refer to “Initial System Start-Up” on page 9) and press again. If the disc still cannot be ejected, consult your Alpine dealer.

(CDE-W235BT only)

•A copy-protected WMA file was played back.

–You can only play back non-copy-protected files.

•A sampling rate/bit rate not supported by the unit is used.

–Use a sampling rate/bit rate that is supported by the unit.

(CDE-W235BT only)

•A copy-protected WMA file was played back.

–You can only play back non-copy-protected files.

•A sampling rate/bit rate not supported by the unit is used.

–Use a sampling rate/bit rate that is supported by the unit.

NO SUPPORT

•Text information that is not recognizable by the unit has been input.

–Use a USB Memory device with input text information that is supported by the unit.

•Communication error

–Turn the ignition key off, and then set to ON again.

–Check the display by reconnecting between the USB Memory and this unit.

•Power surge error

Excessive voltage/current is supplied to the USB Memory.

–Try another USB Memory, if available.

37-EN

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Innan du använder utrustningen bör du läsa CDE-W235BT onlyLees deze aanwijzingen aandachtig alvorens dit Παρακαλούμε διαβάστε το πριν χρησιμοποιήσετεPage Contents Setting the Bluetooth Device Setting the Visible Mode Pairing a Bluetooth compatible deviceText message indicator ON/OFF Setting the caller information display ON/OFFInstallation and Connections Failure to do so may result in fire or electric shock Doing so may result in an accident, fire or electric shockCentre Hole CD and you may not be able to play it againBumps Outside Transparent SheetUnit can play back mp3, wma or m4a file extensions Protecting the USB Connection TerminalAccessory List Turning Power On and OffAdjusting Volume Source SelectionPress TUNEA.ME to select the tuning mode Setting TimeListening to Radio 10-ENPresetting Stations Automatically Presetting Stations ManuallyTuning to Preset Stations Frequency Search Function12-EN Turning AF Alternative Frequencies ON/OFFRDS digital data includes the following Illustration is for CDE-W235BTTA mode, the Seek tuning selects only the TP stations PI Seek SettingReceiving Traffic Information Displaying Radio TextRepeat Play PlaybackX. Random Play Searching for CD Text15-EN About MP3/WMA/AAC16-EN TerminologyRear/Loudness/Defeat Audio SetupLeft and Right/Fader Between Front Middle Level/Treble Level/Balance BetweenAdjusting the Parametric Equalizer Curve 3BAND EQ Equalizer Presets F-EQSetting the Bass Control Setting the Mid ControlAdjusting the High Pass Filter Setting the Source Volume LevelAdjusting the Low Pass Filter Setting the Subwoofer PhaseDisplaying the Text Connecting to an External Amplifier Power ICExternal Device 20-ENOption Menu Setting Using the Front AUX Input TerminalAbout the indication display About Text22-EN SettingSelect General General Setting IPod/iPhone Setting Display SettingAbout Bluetooth Setup Before UsingBefore Using Bluetooth Function 25-ENSetting the Bluetooth Device Setting the Bluetooth Connection BTHands-Free Phone setting HFP Bluetooth Audio setting AudioPairing a Bluetooth Device from the unit Setting the Visible ModeSetting the Bluetooth sound quality Setting the Bluetooth Menu language Phone Book Auto Update ON/OFFSetting the Received Calls automatically Auto Answer Displaying the phone service provider nameAbout the Hands-Free Phone Hands-Free Phone ControlAnswering a Call Hanging up the TelephoneRedialing a Number In Outgoing History Voice Dial OperationDialing a Number In Incoming History Dialing a Number In Incoming Missed Call HistoryBluetooth Audio Operation 32-EN Remove USB MemoryPressing again will resume the playback USB Memory Sold separatelySetting the iPod Control Connecting an iPod/iPhoneOption menu for iPod mode is activated IPod control mode will switch between Ipod Mode and HU ModeSearching for a desired Song Press SOURCEto switch to the iPod modeAlphabet search function 34-ENSelect Playlist/Artist/Album/Genre/ Composer Direct Search Function Random Play Shuffle M.I.X35-EN Genre/ComposerBasic Case of DifficultyRadio AudioIndication for CD Player IPodIndication for USB Memory 37-ENBluetooth mode CDE-W235BT only Indication for iPod Mode38-EN Bluetooth Section CDE-W235BT only Specifications39-EN 40-EN Installation and ConnectionsRemoval InstallationMounting the Microphone CDE-W235BT only 41-EN42-EN ConnectionsSpeakers Amplifier 43-EN  Switched Power Lead Ignition Red
Top Page Image Contents