CD/MP3/WMA/AAC | |
| /REPEAT 4 |
| |
| /SHUFFLE 5 |
| |
| /ENTER |
SOURCE/ | Rotary encoder |
Playback
The following table shows which discs can be played on which models.
| CD | MP3 | WMA | AAC | |
|
|
|
|
|
|
| | | | | |
|
|
|
|
|
|
| | |
|
| |
|
|
|
|
|
|
1Insert a disc with the label side facing up. The disc will be pulled into the unit automatically.
•The “” indicator lights up when a disc is inserted.
•
•Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.
•The track display for MP3/WMA/AAC data playback is the file numbers recorded on the disc.
•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
•During CD/MP3/WMA/AAC playback, press , and then you can quickly return to the hierarchy level selected last time in the search mode.
Repeat Play
1Press a/REPEAT 4.
The song is played back repeatedly. a*1 a*2 (off) a
*1 Only a track/file is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3/WMA/ AAC mode only)
2To cancel repeat play, select (off) with the above procedure.
M.I.X. (Random Play)
1Press s/SHUFFLE 5.
The songs are played back in random sequence. s*1 s*2 g*3/*4 (off) s
*1 The tracks are played back in random sequence. (CD mode
only)
*2 Only files in a folder are played back in random sequence.
(MP3/WMA/AAC mode only)
*3 The files in the disc are played back in random sequence.
(MP3/WMA/AAC mode only)
*4 In the USB mode, all files stored in the USB Memory are played back in random sequence.
2To cancel M.I.X. play, select (off) with the above procedure.
Note
•When a disc is already inserted, press SOURCEto switch to the DISC mode.
2While playing back MP3/WMA/AAC, press or to select the desired folder.
Pressing and holding or will change folders continuously.
3Press or to select the desired track (file). Pressing and holding or will fast backward/fast forward track continuously.
4To pause playback, press . Pressing again will resume playback.
5To eject the disc, press .
Notes
•Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song.
1Press ENTER during play.
This will set the search mode, and the “” indicator lights up.
2Turn the Rotary encoder to select the desired track, and then press ENTER.
This will play the selected track.
Notes
•Press in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds.
•When CD Text Search is made during M.I.X. play, the M.I.X. play mode will be cancelled.