Alpine IVA-D901 owner manual System Setup Operation, 33-EN

Page 35

System Setup Operation

To display the System mode screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the System mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the System mode screen.”

The following steps 1 to 6 are common operations to each “Setting item” of SYSTEM Setup. Refer to each section for details.

1 Press SOURCE/POWER.

The main menu is displayed.

2 Press 6 (SETUP).

The Setup mode screen appears.

3 Turn the Rotary encoder to select “SYSTEM,” then press the Rotary encoder.

The SYSTEM list is displayed.

4 Turn the Rotary encoder to select your desired setting item.

The screen shows the ∗Function Guide.

*Displays the function assigned for each button (the Function buttons).

Setting items:

NAV.MIX ↔ NAV.IN ↔ AUX IN1 ↔ AUX IN2 ↔ AUX IN3

↔AUX IN1 MODE ↔ AUX IN2 MODE ↔ AUX IN3 MODE

↔CAMERA IN ↔ MONITOR OUT1 ↔ MONITOR OUT2

↔IN-INT MUTE ↔ IN-INT ICON ↔ A.PROC TYPE

5 Press the function buttons to switch the setting.

6 Press 7 (RETURN).

The screen returns to the previous one.

•With the System screen displayed, pressing and rotating the rotary encoder will adjust the volume level.

•Immediately after inputting titles or changing the settings of System Mode (While the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, a title may not be written, or the settings may not be changed.

Navigation Interruption and Adjusting its Volume

Setting item: NAV.MIX

Setting content: OFF / ON

With an Alpine navigation system connected to the IVA-D901, the voice guidance of the navigation system will be mixed with the radio or CD play. You can adjust the volume level of the voice guidance.

OFF: The navigation interruption mode is turned off.

ON: The navigation interruption mode is on.

1)After setting it to ON, press the Rotary encoder to select

NAV.MIX mode.

VOL. → NAV. → SUB W. → BAL. → FAD. → DEFEAT → VOL.

2)Turn the Rotary encoder to adjust the volume (0 to 15) of

the navigation voice.

•The audio volume during the navigation guide can be set by adjusting the audio volume while the navigation guide continues. When the navigation guide finishes, the previous audio volume and the previous screen are restored. For exception, if the navigation cuts in when the audio volume is lower than the setting level, the audio volume during the navigation guide is reset the current listening volume. (When the navigation guide cuts in, the audio volume does not increase.)

•This setting is effective when NAV.IN of SYSTEM list screen is ON.

•When PXA-H510 or PXA-H900 is connected, NAV.MIX value set in this unit does not affect PXA-H510 or PXA-H900.

Setting the Navigation Mode

When you connect an optional navigation equipment, set it to ON.

Setting item: NAV. IN

Setting contents: OFF / ON

ON: Navigation source is displayed.

OFF: Navigation source is not displayed. The settings related to the navigation can not be changed from this unit.

Setting the AUX Mode

Setting item: AUX IN 1, 2, 3

Setting content: OFF / LEVEL LOW / HIGH

OFF: AUX source is not displayed.

LEVEL LOW/HIGH:

The sound volume from the external equipment can be adjusted. When LOW or HIGH is selected, AUX source will be ON.

•OFF is not displayed when the optional DVD player or DVD changer is connected.

•When OFF is selected, the settings related to AUX can not be changed from this unit (except for “Name external equipment to be displayed” page 34).

•When either DVD player or DVD changer is connected to AUX IN 1, DVD is displayed on the screen. When both of them are connected, DVD is displayed for AUX IN 1 and DVD CHG is displayed for AUX IN 2.

Continued

33-EN

Page 34 Page 36
Image 35
Page 34 Page 36
Contents IVA-D901 CHA-1214CHM-S630 CHA-S634Contents Navigation System Optional Installation and Connections Operating Instructions Precautions Discs playable on this unit Using compact discs CD/CD-R/CD-RW Basic Operation Getting StartedRaising/Lowering the Monitor Turning Power On or OffDetaching and Attaching the Front Panel Initial System Start-UpMoving the Monitor to be Flat Adjusting the Monitor Viewing AngleLowering Volume Quickly Selecting the Monitor Opening AngleRadio Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset Stations12-EN PlaybackRepeat Play 13-EN X. Random PlaySelecting Folders concerning MP3 About MP314-EN DVD/Video CDPlaying DVD/Video CD TerminologyPress c To display the DVD mode screenDisplay shows the DVD player mode screen 15-EN16-EN Stopping Playback PRE StopStopping Playback If a menu screen appearsChapter/Track/Title Repeat Playback Playing Still Frames PausingFast-forwarding/Fast-reversing Slow Motion PlaybackSearching Directly by Chapter or Track Number Switching the Angle DVD onlySwitching the Audio Tracks Searching by Title Number DVD onlyDisplaying the Disc Status for Video CD Switching the Subtitles Subtitle Language DVD onlySwitching from the disc menu Displaying the Disc Status for DVD20-EN Sound SettingSetting the MX mode 21-EN Setting the Bass EngineSetting the Bass Control Setting the Treble Control22-EN About the Time CorrectionBass Focus 23-EN Adjusting the Built-in CrossoverSubwoofer On and Off Time Correction24-EN Other Useful FeaturesTitling Radio Stations/Discs Displaying the Title List25-EN Setting of ScrollingSwitching the function of the remote sensor Rear Entertainment Function26-EN Blackout Mode On and OffSwitching Display Modes DemonstrationMain menu appears on the display Switching the Visual Source Only Simul FunctionDisplaying the Spectrum Analyzer 27-EN28-EN SetupDVD Setup Operation 29-EN Setting of the Subtitle LanguageChanging the Country Code Setting Setting the Rating Level Parental Lock30-EN Changing the Digital Output SettingSetting item Digital OUT Mode Setting contents Auto / Lpcm 31-EN General Setup Operation32-EN 33-EN System Setup Operation34-EN 35-EN Display Setup OperationMain menu screen appears on the display Operating Auxiliary Devices Optional36-EN 37-EN Display changes to the CD changer mode screenChanger Optional Controlling CD Changer Optional38-EN XM Radio OptionalMulti-Changer Selection Optional Receiving XM Channels with the XM Receiver OptionalChanging the Display Tuning in to Categorized ProgramsStoring XM Channel Presets Checking the XM Radio ID Number40-EN MobileHub Link OptionalDisplaying the Category/Channel Name Title List About MobileHub Link OptionalDial call Calling by using the Speed DialTelephone Reception CallingReceiving a Short Message SMS Short Message Service OperationCalling by the address book Calling by the outgoing / incoming Absent incoming historyPress 1 to send Sending a standardized sentence43-EN Pres the 6 SMS Write44-EN Adjustment Procedure for Dolby Surround45-EN Setting the SpeakersSet MX Mode of the External Audio Processor 46-EN Over AdjustmentPerforming Time Correction Manually TCR/ Swithing the Phase Check that Defeat mode is off47-EN Graphic Equalizer AdjustmentsParametric Equalizer Adjustments 48-EN Bass COMP. SettingSpeaker Setup Bass FocusMixing bass sound to the rear channel Setting of Dolby 5.1chAdjusting the acoustic image Achieving powerful high volume soundAdjusting the speaker levels Adjusting the DVD LevelStoring Settings in the Memory Getting out the Preset MemoryTurn the Rotary encoder to select Dolby PL Using the ProLogic II ModeLinear PCM Setting 51-EN52-EN Remote ControlOperating for the IVA-D901 53-EN 54-EN Operating the DVD player/DVD changer sold separately55-EN Operating the Navigation sold separatelyOperating a separately sold TV monitor 56-EN Battery ReplacementOpening the battery cover Replacing the battery57-EN InformationAbout DVDs Linear PCM audio Lpcm TerminologyDolby Digital Dolby Pro LogicFor details, see List of Language Codes59-EN 60-EN List of Country Codes61-EN CD/MP3/DVD/Video CD Case of DifficultyBasic Radio63-EN Indication for CD/MP3Monitor Indication for DVD/Video CD64-EN 65-EN Indication for XM radio modeIndication for CD changer Bottom side of Monitor player Specifications66-EN 67-EN Installation and Connections68-EN InstallationInstalling the Monitor 69-EN Installing the Tuner BoxInstalling the DC/DC Converter Mounting the remote control holderFoot Brake Lead / Parking Brake Lead Connection Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available Parking Brake Lead Connection71-EN Connections IVA-D901 Wiring Diagram72-EN 73-EN System ExampleAUX Video Input AUX1 Terminal Digital Output Terminal Ai-NET Connector74-EN AUX Video/Audio Input AUX3 Terminal Camera Input Terminal When Connecting External EquipmentUse when connecting a back-up camera 75-ENA -800-ALPINE-1 1-800-257-4631 Canada 1-800-ALPINE-1 This Warranty does not cover the following

IVA-D901 specifications

The Alpine IVA-D901 is a highly regarded in-dash multimedia receiver designed to elevate the in-car entertainment experience. With its sleek design and advanced technology features, it caters to the needs of modern drivers and passengers alike. The unit supports a wide range of media formats, allowing users to enjoy their favorite music and videos on the go.

One of the standout features of the IVA-D901 is its 7-inch motorized touchscreen display. This high-resolution LCD screen offers impressive clarity and color, making it easy to navigate through menus and control media playback. The touchscreen is highly responsive, providing an intuitive interface that enhances user experience. Additionally, the motorized function allows the screen to elegantly retract when not in use, contributing to its aesthetic appeal.

The IVA-D901 stands out with its extensive connectivity options. It supports both Bluetooth and USB connections, facilitating hands-free phone calls and wireless audio streaming. This makes it incredibly convenient for users who wish to maintain focus on the road while still enjoying their favorite tracks. Moreover, the unit is compatible with various external devices, enabling seamless integration with smartphones and tablets.

Another notable characteristic of the IVA-D901 is its versatility in media playback. It is designed to play DVDs, CDs, and a variety of video files, including MP4 and DIVX. The built-in DVD player enhances the multimedia experience, allowing passengers to enjoy movies during road trips. Additionally, the receiver also supports AM/FM radio, providing traditional entertainment options.

Users also benefit from the advanced tuning capabilities of the IVA-D901. Its built-in DSP (Digital Signal Processing) allows for customizable sound settings, ensuring that audio can be tailored to individual preferences. This feature creates a more immersive listening experience, as adjustments can be made based on the acoustics of the vehicle.

In terms of expansion, the Alpine IVA-D901 is equipped with multiple preamp outputs, allowing for the easy addition of amplifiers or subwoofers. This flexibility enables users to enhance their sound system to achieve the desired audio performance.

To sum up, the Alpine IVA-D901 is a powerful multimedia receiver that combines stunning visuals, extensive connectivity, and high-quality audio capabilities. It’s a perfect choice for those who seek luxury and functionality in their in-car entertainment setup.
Top Page Image Contents