OPERATING INSTRUCTIONS
10
accessible when the front panel of the unit is released to the horizontal
by pressing the button cm. Radio opera- tion will automatically resume when the cas- sette is ejected.
NOTE: Never leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism of the unit. Always press the eject button and remove the cas- sette.
cq CD OPEN/CLOSE/EJECT (EJ) AND DISC SLOT
The disc slot is located behind the front panel; to access the slot, momentarily press the
DISC OPEN/CLOSE/EJ button ( ). This causes the front panel to open and fold down to the 45° position, thereby allowing room to insert the disc into the player without revealing the cassette door below. With the front panel in this
into the slot (label surface facing up) until the
( ) indication illuminates and becomes animated, the disc in symbol ( ) appears, and the track number ( TRK 01) appears on the display panel together with the elapsed playing time.
CAUTION: This unit is designed for play of standard 5" (12cm) c o m p a c t discs ONLY. Do not attempt to u se 3" (8cm)
cr TRACK SELECT ( / )
During disc play the Track Select functions are performed by the MANU SKIP buttons. Track select is used to quickly access the beginning of a particular track. Each time the Forward
Track Select ( ) side of the button is pressed and released, the next higher track number will be selected as shown on the display panel. Similarly, each time the
Backward Track Select ( ) side of the button is pressed, the next lower track number will be selected as shown on the display panel.
cs CUE/REVIEW FUNCTIONS ( / )
During disc play
buttons. Press and hold the Cue ( ) side of the button to advance rapidly in the forward direction (the advancing disc playing time will be shown on the display panel), or the Review
( ) side of the button to advance rapidly in the backward direction ( the decreasing disc playing time will be shown on the display panel).
ct DISC PAUSE BUTTON (PAU)
When a disc is loaded into the player, CdP momentarily appears on the display and the symbol becomes animated. These indications are followed by display of the disc
in symbol ( ) and track number ( TRK 01, etc.) as the disc begins to play. To stop disc play, press the MODE button to return to radio operation. To pause disc player operation, press the PAU button; PAUSE will appear on the display panel. To resume disc play, press the PAU button again; PAUSE will disappear and disc play will resume from the point at which it was stopped.
10 of 20