cu TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of each track on the disc (SCAN will appear on the display panel). When a desired track is reached, press the SCN button again to cancel the function (SCAN will disappear from the display panel) and play of the selected track will continue. Scan mode will also be canceled by activating the Repeat Play, Random Play, or track select functions.
dl REPEAT PLAY SELECTOR
During disc play, press this button to repeat the play of the selected track (RPT will appear on the display panel). Play of the track will continue to repeat until the button is pressed again and the RPT indication disappears from the display panel. Repeat Play mode will also be canceled by activating the Track Scan or Random Play select functions.
dm RANDOM PLAY SELECTOR (RND)
During disc play, press this button to play the tracks on the disc in a random shuffled order (RND will appear on the display panel). In Random Play mode, the Track Select function will also select tracks in the random order instead of the normal progression.The Random Play mode can be canceled by pressing the button again (RND indication will disappear from the display panel), or by activating the Track Scan or Random Play select functions.
dn DISC EJECT
During CD player operation, disc play is stopped and the disc is ejected when the CD
OPEN/CLOSE/EJ () button on the front of the chassis is pressed to fold down the panel to the 45° position, and then pressed and held for at least 2 seconds. Radio or another mode will automatically resume depending on which mode was in operation prior to disc play. If the
disc is not removed from the unit within approximately 15 seconds of being ejected, it will automatically be
( will appear on the display panel to indicate that a disc is still loaded in the player). Play of the disc can be resumed by using the MODE button to choose the CD player function.
do TIME/FREQUENCY SELECTOR (T/F)
The radio is capable of displaying the
During integral CD player or cassette player operation, or during CD changer or auxiliary input operation, a press of the button will call
the time display, but tape or disc play will continue uninterrupted. The time display will remain until the T/F button is pressed again.
dp RESET BUTTON
A Reset button is accessible in the lower left corner of the front panel and can be used to activate the reset circuitry. However, this feature should only be activated under the following circumstances as it will erase the time and
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches on the unit, pressing the Reset button may clear the system and permit a return to normal operation.
dq INFRARED SENSOR
Detects infrared command signal from the re- mote control unit.
OPERATING INSTRUCTIONS
11
11 of 20