Operating Instructions

bt 1 3 bs

2 8 9

1ON-OFF POWER BUTTON VOLUME LEVEL MEMORY

Press this button momentarily to turn the unit on or off.

This button is also used to set the memory for the volume level which will be recalled when the unit is turned on. To set the volume memory, turn the unit on and adjust the volume using the Volume Control 2 to the level which you wish to be recalled when the unit is turned on. Then, press the On-Off button and hold it for approximately 2 seconds. The unit will turn off and the selected volume level is now set in the memory. If the unit is turned off with the volume higher than the memory setting, the unit will return to the memory setting when turned back on. If, however, the unit is turned off with the volume lower than the memory setting, the unit will return to the lower setting when turned back on.

-1-

bqbrbp bl

2VOLUME LEVEL CONTROL (VOL+ / VOL-)

To increase the volume level, press the “VOL +” side of the button. The volume will increase and the level will be shown on the display panel from a minimum of 0 to a maximum of 80. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the “VOL -” side of the button. Keep the button pressed to decrease the volume quickly. The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated. These buttons are also used in conjunction with the Select button 3 to adjust the bass, treble, balance, and fader levels as described in 4 , 5 , 6 and 7 .