Setup Operation
Adjusting Display Brightness
Turn the Rotary Encoder to select the Brightness Level in the setting range from 1 to 11.
N O T E : The initial setting at the factory is “06”
Changing Source Type
Turn the Rotary Encoder to select the source type
Range : Aux > MD > DVD
N O T E : The initial setting at the factory is “Aux”
In case of satellite broadcasting, set to AUX.
Local / DX Seek
Turn the Rotary Encoder to select either the Local or DX seek setting. When using the Local Seek setting, only stations with a strong signal will be tuned during Automatic Seek or Auto Store Tuning.
N O T E : The initial setting at the factory is “DX”
Selectable RDS Regional Setting
Turn the Rotary Encoder to select either te RDS Regional On or Off. When RDS Regional is On, the unit will only allow AF switching to the exact matching broadcast (PI Code).When RDS Regional is Off, the unit will allow AF switchig to regional varriants of the broadcast.
N O T E : The initial setting at the factory is “On”
33