REAR WHEELS | SECTION 6 | |
|
|
|
ADJUSTING THE QUICK-RELEASE AXLE (FIGURE 3)
NOTE:
1.Remove rear wheel and
2.Depress detent pin in the
3.Release detent pin ensuring that the locking pins are fully released.
4.Increase or decrease end play by adjusting the locknut on the end of the
5.Reinstall rear wheel onto the wheelchair. Refer to REMOVING/INSTALLING THE REAR WHEELS in this section of the manual.
Wheelchair Frame
REAR WHEELS
Locking Pins
Locknut
| Detent Pin |
Axle Spacer | Rear |
(Conventional | |
Arms Only) | Wheel |
Quick- Release Axle | Hub |
FIGURE 3 - ADJUSTING THE QUICK-RELEASE AXLE
Part No. 1110550 | 35 | Tracer® SX5 |