Invacare SX5 Recliner manual REMOVING/INSTALLING the Rear Wheels Figure

RECLINER

SECTION 10 RECLINER

REMOVING/INSTALLING THE REAR WHEELS (FIGURE 6)

WARNING

If changing the size of the rear wheel or a change in the SEAT-TO- FLOOR HEIGHT is desired, this procedure MUST be performed by a qualified technician.

Ensure both rear wheels are the same size before using.

TRACER SX5 RECLINER ONLY: Mount the rear wheels in the Rear Wheel Offset Bracket ONLY. NEVER reposition the rear wheels to the forward position, as stability of the wheelchair will decrease, and injury or damage may result.

REMOVING

1.Note mounting position of EXISTING rear wheel.

2.Remove the axle mounting screw and locknut that secure the EXISTING rear wheel and spacer to the wheel offset bracket.

3.Remove the EXISTING rear wheel from wheel offset bracket.

INSTALLING

1.Secure the new/existing rear wheel and spacer to wheel offset bracket with axle mounting screw and locknut. Securely tighten.

Rearward	Locknut	Rear Wheel
Mounting
		Spacer
Position	Forward

XMounting Positions

X(DO NOT USE)

Rear Wheel

Rear Wheel Offset BracketOffset

Bracket

Axle Mounting Screw

FIGURE 6 - REMOVING/INSTALLING THE REAR WHEELS

Tracer® SX5 50 Part No. 1110550