Audiovox ACC-60 manual CrDISC Select Disc SEL Button, Cs Auxiliary AUX Button, Cu Disc Eject

OPERATING INSTRUCTIONS

10

(TUNE/TRK) and press the MEMory Selector button. The indication M - 01 will momentarily appear on the display panel, indicating that the selected track has been entered as the first one to be played in Programmed Play mode.

3.Select the second track to be pro- grammed (this could be on another disc) using the Track Select button and then press the Memory Selector button. M -02will appear on the display, and the selected track has been entered as the second one to be played in Programmed Play mode.

4.In similar manner, continue selecting other tracks (up to a maximum of 18) to be played in programmed order. The indication FULL will appear on the display panel if attempting to program more than 18 selections.

cq PROGRAMMEDPLAYSELECTOR(PGM) To play the tracks in the selected order after programming is completed, press the Pro- grammed Play button so that the PGM indi- cation appears on the display panel. Play will begin of the first track selected in the programmed order. During Pro- grammed Play mode, the Track Select func- tions will operate in the programmed order instead of the normal progression. Track Scan and Track Repeat can be selected during Programmed Play and will operate on the programmed tracks.

To de-activate Programmed Play and return to play of all tracks on the disc in normal order, press the Programmed Play button again so that the PGM disappears from the display panel. Activating the Cue/Review functions or the Random Play mode will also cancel Programmed Play mode.

Clearing Programmed Play Memory: To clear the Programmed Play memory, press the Memory Clear button at any time during Pro- grammed Play mode (PGM on display

panel). PGM will disappear from the display panel, M --- CL will appear momentarily, and the pro- gram will be erased. The Programmed Play memory will also be cleared automatically when the disc(s) is ejected.

NOTE: Program Play memory will be maintained if the disc is left in the player when the unit is shut off.

crDISC SELECT (DISC SEL) BUTTON

When this button is pressed during disc play, the next CD in order is selected for play. The selected DISC segment number (1-5) is highlighted on the

front panel disc icon ( 5 1 2 3 ) and flashes while play is active. The segment 4number also flashes dur- ing radio operation if the disc(s) is still installed.

cs AUXILIARY (AUX) BUTTON

If an portable audio device, is connected to the Left and Right auxiliary input jacks, this source can be selected for play through the radio by pressing the AUX button. When the button is pressed, A --inappears on the display panel. When the auxiliary input is being used, no other audio input sources (radio or CD) are operational.

ctPANEL DISC SELECT (DISC SEL) BUTTON The back of the front panel contains a DISC SEL button which is used in conjunction with the disc

number LCD and Disc Eject ( ) button to select a particular CD you wish to remove and/or replace. When the DISC SEL button is pressed, the disc number display to the left sequences through discs 1-5.Stop at the number disc you wish to eject and press the eject button. The selected disc will be ejected.

cu DISC EJECT ( )

Disc play is stopped; the disc currently selected for play is ejected and the unit will revert to radio operation by pressing this button (EJT will briefly appear on the display panel). When the disc is ejected, no cd appears on the display; press BAND to return to radio operation. The disc must be removed from the unit or be reloaded. Pressing the Disc Eject button for at least 2 seconds will eject all discs from the unit in sequence, beginning with the disc currently in play.