Audiovox ACC-60 manual Bp Liquid Crystal Display Panel, Bq Function Display, Br Disc Slot

bn STATION PRE-SET MEMORIES

To manually set any of the 6 pre-set memory buttons, use the following procedure:

1. Turn the unit on and select the desired band.

2. Select the first station to be pre-set using the TUNE/TRK buttons.

3. Press and hold the pre-set button to be set for approximately 2 seconds. The pre-set number CH 1-6will appear on the display, indicating the station is now set into the memory position of that pre-set button and can be recalled at any time by momentarily pressing that button.

4. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit.

OPERATING INSTRUCTIONS

the band in use. The unit will stop at each	fortable listening, the stereo indication will ap-
pre-set station for 10 seconds before continu-	pear intermittently or not at all; if an AM or monau-
ing to the next pre-set station (the frequency	ral signal is received, the	icon will disappear
on the display panel will flash during Pre-Set	from the display panel.
Scan operation). Press the button again	bp LIQUID CRYSTAL DISPLAY PANEL
momentarily to stop Pre-Set Scan operation
and remain on the selected frequency.	The Liquid Crystal Display (LCD) panel displays
Pressing the button for longer than 2 sec-	the frequency, time, and activated functions.
onds will activate the Auto-Store Tuning fea-	NOTE: It is a characteristic of LCD panels that, if
ture. The radio will automatically scan the band	subjected to cold temperatures for an
	extended period of time, they may take
in use and enter strong local stations into
	longer to illuminate than under normal
the pre-set memory positions for that
	conditions. In addition, the visibility of
band. LOC will appear on the display as
	the numbers on the LCD may slightly
tuning occurs. If you have already set the
	decrease. The LCD readout will return
pre-set memories of that band to your favor-
	to normal when the temperature increases
ite stations, activating the Auto-Store Tun-
	to a normal range.
ing feature will erase those stations and
	bq FUNCTION DISPLAY
enter the new stronger stations. This fea-
ture is most useful when traveling in a new	The Function Display consists of a single bar
area where you are not familiar with the lo-	graph which displays a bar graph which provides
cal stations.	a visual representation of the audio signal power

level. As the volume is increased, the number of illuminated segments will increase.

8

bo FM STEREO/LOCAL(LOC) INDICATIONS

The unit receives both stereo and monaural signals. During FM radio operation, the unit is usually receiving a stereo signal as indi-

cated by the stereo icon ( ) on the dis- play. If a stereo signal is too weak for com-

br DISC SLOT

With the label surface facing up, gently insert each disc into the slot until the soft-loading mecha- nism engages and draws the disc into the player. The number of discs loaded will appear both on the front panel display disc icon (flashing white segment) and on the DISC INF display on the rear of the front panel. The discs will be loaded in order beginning with the number (1-5) currently displayed. Disc play will begin when the CDC button is pressed; and play will start with track 1 on the last disc loaded, unless another disc is selected using the DISC SEL button on the front side of the panel.

NOTE: This unit is designed for play of standard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adap- ter, as damage to the player and/or disc can occur. Such damage will not be cov- ered by the Warranty on this product.