Using Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform Auto Program to set up your channels. When Auto Programming, the TV will automatically search for available channels and program receivable channels.
1Press 
to turn on the TV. The Initial Setup screen appears.
Initial Setup
Auto Program: [CH+]
Exit:[CH–]
First please connect cable/antenna
2Press 
on the remote control or on the TV front panel to perform Auto Program, or press 
to exit.
✍The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
To perform Auto Program again
1Press 
.
2Press g to highlight Channel Setup Menu.
3Press f to highlight Cable. Press 
to select.
4Press F or f to select On or Off according to how you connected your TV. Press 
.
5Press f to highlight Auto Program. Press 
to search for channels.
6After performing Auto Program, press 
to exit.
To reset the TV to factory settings
1Turn the TV on.
2Hold down 
on the remote control.
3Press and release the POWER button on the TV front panel. (The TV will turn itself off, then back on.)
4Release 
.
17