Sony KV-27FS100 Using the Timer Menu, To access the Timer menu, refer to the following steps

Page 43

Using the Menus

Using the Timer Menu

To access the Timer menu, refer to the following steps:

To Display

To Highlight

To Select

Video

Audio

Channel Parent

Timer

Setup

Basic

Timer 1 : Off

Timer 2 : Off

Current Time

Program

Program the time

:

AM

Move:

Select:

End:

Current Time Set your TV to the current day and time. Press to open Current Time menu:

1Use the F or f buttons to enter the correct day and time, then press .

2Press to exit the menu.

✍You must set the Current Time before you can use Timer 1 or Timer 2.

Timer 1 and	Use the timers to program your TV to turn on and off by day, time, duration and
Timer 2	channel. The timers duration is maximum of 6 hours. When the channel is fixed,
Scheduled	it is not necessary to set the channel.
viewing	1 Use the F or f buttons to select Timer 1 or Timer 2, then press	.

2Use the F or f buttons to enter the desired day, start time, duration, and

channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be turned on.

3Press to exit the menu.

✍Select Off to turn off the Timer (your previous settings will be saved).

✍When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.

35

Image 43

Contents Operating Instructions Page Owner’s Record Protecting the TVTrademarks and Copyrights Accessories Use Power SourcesCleaning InstallationSafety Check Power-Cord ProtectionService Damage Requiring Service Replacement PartsPage Contents Page Introduction Introducing the FD Trinitron Wega FeaturesOperating Instructions Batteries for the Remote ControlAbout this Manual Front Panel Menu ControlsIntroduction Using the Remote ControlTV/VIDEO Unscrambled cable channels Picture quality when you need to switch between scrambledTV Rear Panel Jack DescriptionSystem Connecting Your TV JackDescriptionJacks provide better picture quality than the VHF/UHF jack Connects to the Audio LMONO, R input jacks on your audioTV with Indoor or Outdoor Antenna, or Catv Cable Basic ConnectionsNot supplied Page Page Optional connection Connecting Additional EquipmentConnecting a TV and VCR Connecting Your TVRear of TV Splitter Connecting a TV, VCR, and Cable BoxCable Box Connecting Your TV Optional connection Connecting a TV and Satellite ReceiverRear of TV Connecting a TV, Satellite Receiver, and VCR Rear of TV Rear of DVD Player Connecting a DVD PlayerConnecting an Audio System Connecting a CamcorderPage To reset the TV to factory settings Setting Up the TV AutomaticallyTo perform Auto Program again Menu Allows you to Make adjustments to your picture settingsCustomize your channel settings Quick Start to the MenusUsing Basic Functions Menu Allows you to To check your PIP Using Picture in Picture PIPDisplaying Picture in Picture To use PIPTo change channels/programs in the PIP window Using Basic FunctionsPIP Functions buttons Yellow labeled Description PIP buttonSetups that affect your ability to use PIP How to access menus Using the MenusUsing the Video Menu Using the Audio Menu Operating Instructions Audio Out Favorite Channels Using the Channel Setup MenuCable Label Operating Instructions Auto ProgramChannel Skip/AddTo access the Parent menu, refer to the following steps Using the Parent MenuTo use the Parent Menu Select a Country Setting the RatingChanging your Password Parental ControlTo view a program that exceeds the TV rating Using the Custom MenuPress , then use the 0 9 buttons to enter your password Information for ParentsMovie Rating United States Selecting Custom Rating OptionsTV Rating Allow UnratedBlock A. Rating Canada Selecting Custom Rating OptionsEnglish Rating French RatingTimer Using the Timer MenuTo access the Timer menu, refer to the following steps Timer 1Using the Setup Menu Use the g to increase picture contrast Using the Basic MenuTo access the Basic menu, refer to the following steps Press G to decrease picture contrastPage VCR codes Programming the Remote ControlLaser Disc Player codes Operating Instructions VCR codesCable box codes Satellite receiver codesOperating a Laser Disc Press To Other InformationOperating a VCR Press To Operating a DVD Press ToTroubleshooting Using the Basic Problem Possible Solutions Cable stationsRemote control Cannot accessYou lost your After disconnectingTV and timer LED flashes Parental ControlFor all models except as noted SpecificationsKV-36FS100, KV36FS200 Index Page Page Page Page Page Page Page Page Sony Corporation

Related manuals

Manual 64 pages 12.57 Kb

Manual 64 pages 12.58 Kb