Sony CDX-MP70 Labeling a CD, Disc Memo For a CD unit with the Custom File function

Page 14

Labeling a CD

Disc Memo (For a CD unit with the CUSTOM FILE function)

You can label each disc with a custom name (Disc Memo). You can enter up to 8 characters for a disc. If you label a CD, you can locate the disc by name (page 15).

Caution

Do not use the CUSTOM FILE feature while driving, or perform any other function which could divert your attention from the road.

./> control dial

1 Start playing the disc you want to label in a CD unit with the CUSTOM FILE function.

2 Press (MENU), then rotate the

./> control dial until “Name Edit” appears.

3 Press the ./> control dial.

The unit will repeat the disc during the labeling procedure.

4 Enter the characters.

1Rotate the ./> control dial to select the desired character.

A y B y C ... y 0 y 1 y 2 ... y

+y y * ... y * y A

*(blank space)

2Press the M+ button after locating the desired character.

If you press the mbutton, you can move back to the left.

3Repeat steps 1 and 2 to enter the entire name.

5 To return to normal CD play mode, press the ./> control dial.

Tips

Simply overwrite or enter “ ” to correct or erase a name.

There is another way to start labeling a CD: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.

You can label CDs on a unit without the CUSTOM FILE function if that unit is connected along with a CD unit that has the function. The Disc Memo will be stored in the memory of the CD unit with the CUSTOM FILE function.

Note

Repeat/shuffle play is suspended until the Name Edit is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes priority over any original CD TEXT information.

To

Press

View

(DSPL) during CD/CD

 

TEXT disc playback

 

 

Tip

To find out about other items that can be displayed, see page 13.

14

Image 14
Contents FM/AM Optional controller accessory Supplied controller accessoryCard remote commander RM-X112 Wireless rotary commander RM-X5STable of Contents Location of controls Behind the front panel+ control dial VOL volume control dial/SOUND buttonOPEN/CLOSE button 10, 11 q N play button Reset button Precautions Type of discs Audio CD MP3 filesMulti Session About MP3 filesISO 9660 Format Playback order of the folders and files is as follows Resetting the unitPlayback order of the MP3 files Press OFF Detaching the front panelAttaching the front panel Press Z Setting the clockPlaying a disc Place a disc on the disc tray with the label side upAlbum selection Control dial Locating a disc Disc selectionDo this Playback startsPlaying tracks in random order Display itemsPlaying tracks repeatedly Repeat PlayB y C ... y 0 y 1 y 2 ... y Labeling a CDDisc Memo For a CD unit with the Custom File function Viewing the Disc MemoLocating an album or track by name Locating a disc by nameErasing the Disc Memo Press Menu twiceBeep sounds when the setting is stored Best Tuning Memory BTMIf preset tuning does not work Select monaural reception modeStation Memo Operating with the card remote commanderStoring station names Storing the station namesList-up Tuning in a station through a listErasing the station name Inserting the supplied lithium battery By pressing buttonsChanging the operative direction By rotating the controlBy pushing in and rotating the control Changing the sound and display settings Quickly attenuating the soundSound Press MenuSelecting the equalizer curve Setting the equalizerAdjusting the equalizer curve Adjusting the cut-off frequency for the front/rear speakers Adjusting the front and rear volumeAdjusting the volume of the subwoofers Off default setting y 78 Hz y 125 HzSelecting the spectrum analyzer Adjusting the cut-off frequency for the subwoofersOff default setting y 125 Hz y 78 Hz Labeling a Demo displaySelecting auxiliary equipment Connecting auxiliary audio equipmentAdjusting the volume level To deactivate AUX-A in the music source displayReplacing the lithium battery MaintenanceFuse replacement Cleaning the connectorsRemoving the unit Repeat for the right side Slide the unit out of its mountingCD Player section SpecificationsPower amplifier section Tuner sectionTroubleshooting CD/MD playbackRadio reception Error displays/MessagesError displays MessagesAbout ID3 tag version Page FM/AM Précautions Ajustez l’inclinaison à un angle inférieur à Adjust the mounting angle to less than182 mm Toyota Nissan Ajuste el ángulo de montaje a menos de