Sony CDX-MP70 Setting the equalizer, Selecting the equalizer curve, Adjusting the equalizer curve

Setting the equalizer

You can select an equalizer curve for 7 music types (Xplod, Vocal, Club, Jazz, New Age, Rock, and Custom).

You can store a different equalizer setting for each source.

Selecting the equalizer curve

VOL control dial

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press the VOL control dial repeatedly until “EQ7” appears.

3 Rotate the VOL control dial to select the desired equalizer curve.

To cancel the equalizing effect, select “off.” After 3 seconds, the display returns to the normal playback mode.

Note

When DSO is set to on, equalizer settings are automatically adjusted for best overall effect.

Adjusting the equalizer curve

You can store and adjust the equalizer settings for frequency and level.

./> control dial

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (MENU), then rotate the

./> control dial until “EQ7 Tune” appears.

3 Press the ./> control dial.

4 Press the –mor M+ button to select the desired equalizer curve, then press the ./> control dial. Each time you press the –mor M+ button, the item changes.

5 Select the desired frequency and level.

1Press the –mor M+ button to select the desired frequency.

Each time you press the –mor M+ button, the frequency changes.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16 kHz

2Rotate the ./> control dial to adjust the desired level.

The level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press the ./> control dial for 2 seconds.

6 Press the ./> control dial. After the effect setting is complete, the display returns to the normal playback mode.

23