Sanyo P260 setup guide To install the SIM card, do the following, Lift the cover off the phone

Page 7

1 Prepare your mobile

Insert your BT SIM card

To install the SIM card, do the following:

1.Press firmly and slide the top of the back cover off to remove it as shown.

Lift the cover off the phone.

2.Slide the entire SIM card into the SIM card holder, with the metal contacts of the SIM card facing downward and the cut corner at the top left as illustrated.

3.Slide the bottom end of the battery down into the bottom of the battery bay.

4.Press the top end of the battery down so that it locks in place.

5.Place the back cover onto the back of your phone and slide it forward until the latch catches the cover.

Charge your battery for 16 hours

1.Connect the charger to a standard wall outlet.

1

2.Insert the charger plug into the socket on the

 

side of the phone. If the battery is completely

 

 

 

 

discharged, it may take a few minutes before

 

 

the charging indicator appears on the display

2

 

or before any calls can be made. Charge the

 

 

2

battery until the screen shows Fully Charged.

 

 

 

3.Disconnect the charger from the phone when the battery is fully charged. You can use the phone while the charger is connected. After the first charge, the amount of time required for a full charge depends on the type of charger and battery used.

4

3

Switch on your mobile

Slide the phone open and press and hold the key until the phone turns on or off. If the phone asks for a PIN, enter the code 1210, and select OK.

5

Copy your phonebook to your new mobile

To find out how to copy your phonebook to your new mobile, please refer to your handset user guide.

Save your phonebook before porting your number

Ensure that you save your phonebook before you port your number, otherwise you will lose all your existing names and numbers when you swap SIM cards. To do this:

Save your existing phonebook from your old SIM onto your existing mobile

After you port your number, insert your newly activated BT SIM card into your existing mobile and copy the phonebook to this SIM

Finally, remove your BT SIM card and insert into your new BT Fusion mobile

Check your voicemail

Any text messages, voicemail messages and personal greetings you have on your old SIM card will be lost, so make a note of anything important before you swap SIM cards.

03

Image 7
Contents BT Fusion Mobile Welcome to BT Get the most out of BT Fusion Mobile Contents Page BT Fusion Mobile checklist Lift the cover off the phone To install the SIM card, do the followingConnect the charger to a standard wall outlet You will need to follow these set-up instructions You reset to the factory settingsHowever, if Or if Your Samsung P260 Has this sticker on itBT Home Hub will automatically be saved to your networks Enter the Password and select AddReady, Steady, Go Page What is Wi-Fi and wireless broadband? Frequently asked questionsWhat is BT Openzone and The Cloud? Find hotspots BT Openzone and The CloudHighlight Search new networks and press OK Will be disconnected. Continue? Select YesVoicemail Managing your calls To record and send a video clip Multi media servicesHow to take and send a picture message Send your video messages to your friend’sGoing abroad? Call us if your mobile goes missing When not to use your mobileMobile security Activate your SIM PIN, then change it to a secret oneUseful numbers ICE adviceGo to Contacts Select Add New Contact