Nokia 6680 manual Call settings, Display, Diverting’, p

R1105_en.book Page 87 Monday, February 7, 2005 1:31 PM

Right selection key—To assign a shortcut to the right

selection key ( ) in the standby mode, select an application from the list.

You can also assign keypad shortcuts for the different presses of the scroll key, by selecting an application from the list.

Operator logo—This setting is visible only if you have received and saved an operator logo. You can choose if you want the operator logo to show or not.

Display

Brightness—You can change the brightness of the display to lighter or darker. The brighness of the display is automatically adjusted according to the environment.

Screen saver timeout—The screen saver is activated when the timeout period is over.

Light time-out—Select a timeout after which the backlight is switched off.

Call settings

Send my caller ID (network service)—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network).

Call waiting (network service)—If you have activated call waiting, the network notifies you of a new incoming call while you have a call in progress. Select Activate to request the network to activate call waiting, Cancel to request the network to deactivate call waiting, or Check status to check if the function is active or not.

Reject call with SMS—SelectYes to send a text message to a caller informing why you could not answer the call. See ‘Answer or reject a call’, p. 22.

Message text—Write a text to be sent in a text message when you reject a call.

Image in video call—You can deny video sending when you receive a video call. Select a still image to be displayed instead of video.

Tip! To change the settings for call diverting, press , and select Tools > Settings > Call divert. See ‘Call

diverting’, p. 94.

Tools

87