Nokia 6680 manual Connection settings, Data connections and access points

R1105_en.book Page 88 Monday, February 7, 2005 1:31 PM

Tools

88

Automatic redial—Select On, and your phone makes a maximum of ten attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling press .

Summary after call—Activate this setting if you want the phone to briefly display the approximate duration of the last call.

Speed dialling—Select On, and the numbers assigned to

the speed dialling keys ( - ) can be dialled by pressing and holding the key. See also ‘Speed dial a phone number’, p. 21.

Anykey answer—Select On, and you can answer an

incoming call by briefly pressing any key, except ,

, , and .

Line in use (network service)—This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode.

Tip! To switch between the phone lines, press and

hold in the standby mode.

Line change (network service)—To prevent line selection, select Line change > Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

Connection settings

Data connections and access points

Your phone supports packet data connections ( ), such as GPRS in the GSM network.

Glossary: General packet radio service (GPRS) uses packet data technology where information is sent in short packets of data over the mobile network.

To establish a data connection, an access point is required. You can define different kinds of access points, such as:

•MMS access point to send and receive multimedia messages

•Access point for the Web application to view WML or XHTML pages

•Internet access point (IAP) to send and receive e-mail

Check the kind of an access point you need with your service provider for the service you wish to access. For availability and subscription to packet data connection services, contact your network operator or service provider.