Nokia E61 manual Net calls, Exit push to talk, Define the net call settings

Make calls

50

Exit push to talk

Select Options > Exit. Select Yes to log out and close the service. Press No if you want to keep the application active on the background.

Net calls

With the net call service (network service), you can make and receive calls over the Internet.

Your device supports voice calls over the Internet (Internet calls). Your device attempts emergency calls primarily over cellular networks. If an emergency call using cellular networks is not successful, then your device attempts an emergency call through your Internet call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if possible. If you have cellular network coverage available, please make sure that your cellular phone is switched on and ready to make calls before you attempt an emergency call. The capability for an emergency call using Internet telephony depends on the availability of a WLAN network and your Internet call provider's implementation of emergency call capabilities. Contact your Internet call provider to check the Internet telephony emergency call capability. VoIP (voice over Internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the Internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.

The availability of the net call service may vary according to your country or sales area.

Define the net call settings

Before you can make net calls, you need to define the net call settings. After you have defined the net call settings with these instructions, your device logs in to the net call service automatically, when you select Menu > Connect. > Internet tel..

First: define a SIP profile

1.Select Menu > Tools > Settings > Connection > SIP settings > Options > Add new, and enter the required information. You must define all available SIP settings, but ensure that Registration is set to Always on. Contact your net call provider for the correct information.

2.Select Proxy server, and set Transport type to Auto.

3.Select Back until you return to the Connection menu.

Second: define a net call profile

1.Select Internet tel. settings > Options > New profile. Enter a name for the profile, and select the SIP profile you just created.

2.Select Back until you return to the main menu.

Third: select a preferred net call profile (optional)

If you select a preferred net call profile, Internet tel. automatically uses this network profile to connect to the net call service.

1.Select Menu > Connect. > Internet tel..

2.Select Preferred profile, and the net call profile you just created.