The profile you set for expiration is now active and appears in standby mode along with a small clock icon.
■Time settings
Select Menu > Settings > Time settings and one of the following:
Clock—Set the device to show or hide the current time in standby mode, adjust the time, and select the 12- or 24-hour time format. If the battery was removed from the device, you may need to set the time and date again.
Date setting—Set the date. If the battery was removed from the device, you may need to set the date again.
Auto-update of date and time—Set the device to update the date and time from the network when you turn the device on (network service). If the clock in your device is 30 seconds or more off the network time, the device will be updated automatically to reflect the network time. Select On, Confirm first, or Off. If you select Confirm first, the network requests confirmation before updating the time. You can accept or decline the update.
The automatic update of date and time does not change the time you have set for the alarm clock or the reminder notes. Updating may cause some alarms to expire without sounding.
S e t t i n g s
■Call settings
Select Menu > Settings > Call settings and one of the following:
Call divert—Set your network to redirect incoming calls to another number.
Fold call handling—Set your device for Delayed answering, Instant answering, or Off.
Automatic redial—Set your device to redial up to 10 times after an unsuccessful call attempt. Select On or Off.
Auto. serv. upd.—Automatically update call settings. This feature is carrier dependent.
Calling card—Set your device to use your calling card. To enter the calling card information, select Menu > Settings > Call settings > Calling card > Options > Add new or Edit select your card sequence type, and enter the information. Select OK to confirm. Select Card name, enter the card name, and select OK.
For information on making a call, see “Calling cards”, p. 20.
Int. dial. prefix—Stores an international dialling prefix (this feature is network operator dependent). Enter the international dialling prefix, and select OK. To use the prefix, in standby mode, press * twice to use +, and enter the phone number.