Infrared
Connecting to the Internet
To connect to the Internet, you need to type in AT command in the terminal screen on your PC.
On the PC:
Display the terminal screen in the communication software on your PC. (in our example: select Start > Programs > Accessories > Communications > HyperTerminal)
On the GD87:
From Idle mode:
Applications >
Infrared >
Dial-Up
When Ready for Communication is displayed, type in the AT command in the terminal screen on your PC.
Enter the phone number to connect to for Circuit Switch. Use the dedicated phone number to packet for Packet connection.
Enter AT commands as necessary.
Faxing
Ensure that you have fax application software installed on your PC. We recommend you use one of the following packages:
Microsoft Fax (www.Microsoft.com)
WinFax Pro or ProComm Plus (www.symantec.com)
HotFax 3.0 (www.smithmicro.com)
Note: Ensure the fax application is set up to use the area code and, for international calls, the country code.
46