Network Technologies RACKMUX Series, RACKMUX-T15 operation manual Color Palettes Contd

NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER

Table 4- Color Palettes (Cont'd)

	Palette	Display Attribute	Foreground Color	Background Color
6		Normal	Yellow	Black
		Reverse (or blank)*1	Black	Yellow
		Intensity*2	Red	Black
		Intensity*2 and reverse (or blank)*1	Black	Red
		Underline	Cyan	Black
		Underline and reverse (or blank)*1	Black	Cyan
		Underline and intensity*2,*3	Magenta	Black
		Underline, intensity, *2 and reverse (or blank)*1	Black	Magenta
7		Normal	Red	Black
		Reverse (or blank)*1	Yellow	Red
		Intensity*2	Magenta	Black
		Intensity*2 and reverse (or blank) *1	Black	Magenta
		Underline	Cyan	Black
		Underline and reverse (or blank)*1	Black	Cyan
		Underline and intensity*2,*3	Green	Black
		Underline, intensity, *2 and reverse (or blank) *1	Black	Green
8		Normal	White	Black
		Reverse (or blank)*1	Black	White
		Intensity*2	Red	Black
		Intensity*2 and reverse (or blank)*1	Black	Red
		Underline	Yellow	Black
		Underline and reverse (or blank)*1	Black	Yellow
		Underline and intensity*2,*3	Magenta	Black
		Underline, intensity, *2 and reverse (or blank)*1	Black	Magenta
9		Normal	White	Black
		Reverse (or blank)*1	Black	White
		Intensity*2	Yellow	Black
		Intensity*2 and reverse (or blank)*1	Black	Yellow
		Underline	Blue	Black
		Underline and reverse (or blank)*1	Black	Blue
		Underline and intensity*2,*3	Cyan	Black
		Underline, intensity, *2 and reverse (or blank)*1	Black	Cyan
	10 (Soft Palette)	Normal	Green	Black
		(soft Reverse (or blank)*1	Black	Yellow
		palette) Intensity*2	Blue	Black
		Intensity*2 and reverse (or blank)*1	Black	Blue
		Underline	Cyan	Black
		Underline and reverse (or blank)*1	Black	Cyan
		Underline and intensity*2,*3	Red	Black
		Underline, intensity, *2 and reverse (or blank)*1	Black	Red

*1. Whether the reverse or blank attribute is mapped to the colors shown depends on an escape sequence or the setting of the Color Map setup parameter on the Attribute menu. The default is reverse. When the blank attribute is mapped, only the

background is visible.

*2. The intensity is dim in ASCII personalities and bold in ANSI personalities. (The intensity attribute is not supported in the following personalities: Wyse 50+, ADDS A2, TVI 910+, TVI925, and VT52.) The attribute can be disabled by

an escape sequence or in setup mode (Intensity Attribute parameter).

*3. In each palette, the status line displays the same foreground and background colors as shown here for the underline-and- intensity attribute.

15