Network Technologies RACKMUX-T15 VT52 Command Guide, See table below for values of Ps

NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER

Supported VT100, VT220 and Console ANSI Commands, Cont'd

									Command
	FUNCTION					VT100, VT220				Console ANSI
	Request keyboard status report				CSI ? 26 n						Same
	Respond with keyboard language				CSI ? 27; Ps n						Same
	(see table below for values of “Ps”)
	Values of Ps (above)
	Ps	Keyboard Language		Ps				Keyboard Language
1		U.S.	6				Spanish
2		U.K.	7				Swedish
3		Danish	8					Norwegian
4		German	9				Italian
5		French

*1. More than one mode, but less than 17, may be set with one sequence. Enter multiple numeric parameters separated by semicolons (;). However you cannot combine sequences containing "?" with those that don't contain "?", nor can you combine sequences ending with "h" with those ending with "l".

*2. To toggle monitor mode from the keyboard, press CTRL SHIFT 1 (use the 1 on the numeric keypad).

*3. In VT52 or VT100 modes, displays checkerboard character.

6.2 VT52 Command Guide

Table 11- VT52 Mode Escape Sequences

Command		VT52
Move cursor up one line	ESC A
Move cursor down one line	ESC B
Move cursor right one column	ESC C
Move cursor left one column	ESC D
Move cursor to home position	ESC H
Move cursor up one line with scroll	ESC I
Move cursor to line line, column col	ESC Y line col
Select graphics character set	ESC F
Select U.S. ASCII character set	ESC G
Erase from cursor to end of display	ESC J
Erase from cursor to end of line	ESC K
Print cursor line	ESC V
Print display	ESC ]
Transparent print mode on	ESC W
Transparent print mode off	ESC X
Copy print mode on	ESC ^
Copy print mode off	ESC _
Keypad application mode on	ESC =
Keypad application mode off	ESC >
Enter VT100 mode	ESC <
Identify terminal	ESC Z

36