Short Text Messages
Receiving Text Messages
When a Short Text Message is sent to your phone the message indicator (N) will blink in the display, with an audible tone or vibration. This indicates that a new message has been received.
When Read is displayed in the option area press B to read the message. Use gto navigate through the message and to identify the sender of the message.
Note: If the message indicator is displayed constantly (does not blink) this indicates that the message area is full and you
will need to delete old messages in order to be able to receive new messages in the future.
Message Options
Reply to a Message
When you have received and read a message you may wish to reply to the sender. This is the default setting in the option area and pressing Bwill allow you to create a reply message.
Delete a Message
While reading a message use f until Delete is displayed in the option area. Press B twice to delete the message. To enable the
Edit a message
While reading a message use f until Edit is displayed in the option area. Press B and make any amendments. Pressing B will give you the option to send the edited message - see “Sending a Short Text Message” page 27. Press Cif you do not wish to send the message and it will be stored in the Send List.
Using Pre-defined Messages
1From Idle mode press B 313 to enter the Create menu
2Use e to point to the
3Use g to navigate through the message and add any extra text – see “Text Entry” page 48
When complete the message can be sent - see “Sending a Text Message” page 27
28