Getting Started
Getting Started
Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on the Global System for Mobile Communications (GSM), GSM900 or GSM1800. Ensure the battery is fully charged before use.
Before operating this phone please read the “Important Information” section - see page 54.
These operating instructions detail use of the equipment contained in the Main Kit. Some services detailed herein are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your Service Provider.
Fitting the SIM
The SIM is inserted into the back of the phone underneath the battery.
Place the SIM in the recess at the rear of the phone (1) ensuring the bevelled corner is positioned in the top right corner. Slide the SIM to the left (2) using light pressure until it is located under the lugs and the SIM retaining clip has clicked into position (3).
Removing the SIM
Ensure the SIM retaining clip is pressed down (1) and while holding this down slide the SIM to the right (2). Once clear of the lugs the SIM can be lifted out of the recess.
Fitting the Battery
Fit a fully charged battery pack. If the
battery pack is not fully charged then it must be charged as described in the
“Charging the Battery” section.
Locate the top of the battery into the rear of the phone (1). Push the bottom
of the battery into place until it locks into position (2).
1