Additional Features
DTMF Tones
DTMF tones can be sent during conversation. These are often used to access voice mail, paging and computerized home banking. For example, you may need to input a number to remotely access voice mail messages. A phone number may be stored in the Phonebook with DTMF tones, allowing the number to be dialled upon recall and the DTMF number to be sent automatically.
Send DTMF Tones During a Call
Enter digits (0 to 9, # and *)
Pause Dial
Using pauses allows you to send DTMF tones automatically.
1Enter phone number
2 Press and hold 0 until a P is displayed
3Enter DTMF digits after the pause, e.g. enter the number
to access voice mail messages.
4 Press D
When the call is successful DTMF tones will be sent after 3 seconds or when D is pressed.
If the DTMF tones are unsuccessful then the destination of your call may require that the length of the tones be increased.
5From Idle mode press B 57 to enter the DTMF Length menu
6Use e to set to Long and press B
Note Pad
During a call you can enter numbers which you may wish to dial when the call has ended.
During a call:
1Enter phone number
2When the call has ended press D to call that number
To store in Phonebook, press A while the number is displayed – see “Store a Number” page 10.
46