Basic Operation
Basic Operation
Switching the Phone On/Off
To switch the phone on or off.
GSM
Press and hold E to switch power on
You may see a greeting animation and the phone will go into Idle mode.
Press and hold E to switch power off
Names
Menu
If Keyguard is on, it must be disabled first - see “Using Key Guard” page 17.
Making a Call
Ensure the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area.
Enter area code, phone number and press D
International Dialling
Using the automatic international access code (+) you can dial international numbers without knowing the code for the international exchange.
If the international number is known it can be entered manually followed by the area code and phone number.
Country:
UK
Back
Ok
1Press and hold 0 until + is displayed
2Press e to cycle through the abbreviated international country names and press B to select the required country
3Enter area code and phone number and press D
Note: Many countries include an initial “0” in the area code. This should, in most cases, be left out when dialing international numbers. If you have difficulties making international calls, contact your Service Provider.
7