Panasonic EB-GD35 operating instructions WAP Browser, Server Settings

WAP Browser

WAP Browser

The phone’s WAP (Wireless Application Protocol) Browser enables you to access internet services supported by the network, such as news, weather reports, sport etc.

Note: This function is network dependent as some pre-pay services may not allow data connection.

Server Settings

Before you can access internet services, your SIM must be data enabled and the relevant configuration information entered into the phone. These settings may have been pre-programmed for you by the network operator.

Note: Modifying previously entered settings can cause failure of the Browser.

1From Idle mode press B 422 to enter the Server Setting menu

2Two servers may be setup on the phone. Use e to select one or other of the server settings

3Use f to select Edit in the main option area and press B

A list of configuration parameters are displayed. These are:

Name:Enter the name of your WAP server

Home URL: Enter the Home Page of the WAP service, for example, http://wap.provider.net

Port Number: This will normally be set to 9201 (non Secure Connections) or 9203 (Secure Connections). Check with your service provider for further details

Digital Dial: Enter the dial-up access number if your “Circuit Type” is digital

Analogue Dial: Enter the dial-up access number if your “Circuit Type” is analogue

Circuit Type: Select whether connection is analogue or digital. Most connections are analogue, but you should check with your service provider

PPPID: This is the user name your WAP provider uses to identify you

38