Additional Features
Additional Features
DTMF Tones
DTMF tones can be sent during conversation. These are often used for accessing voice mail, paging and computerized home banking. For example, you may need to input a number to remotely access voice mail messages. A phone number may be stored in the Phonebook with DTMF tones, allowing the number to be dialed upon recall and the DTMF number to be sent automatically.
Send DTMF Tones During a Call
Enter digits (0 to 9, # and *)
Pause Dial
Using pauses allows you to send DTMF tones automatically.
1Enter phone number
2Press and hold 0 until a P is displayed
3Enter DTMF digits after the pause, for example, enter the number to access voice mail messages, and press D
+012345P6
NamesMenu
When the call is successful DTMF tones are sent after 3 seconds or when D is pressed.
If the DTMF tones are unsuccessful then the destination of your call may require that the length of the tones be increased.
4From Idle mode press B 55 to enter the DTMF Length menu
5Use e to set to Long and press B
41