Panasonic 6275I Listen to the radio, Voice recorder, To change the volume, press the volume keys

9251758_6275i_1_en_au_oth_v1.0.fm Page 43 Tuesday, August 22, 2006 10:24 PM

M e d i a

To change the volume, press the volume keys.

■Save radio channels

1.To start the channel search,

select and hold or .

To change the radio frequency in

0.1MHz steps, briefly press or .

2.To save the channel to a memory location 1 to 9, press and hold the corresponding number key. To save a channel to a memory location 10 to 20, briefly press 1 or 2,

then press and hold the desired number.

3.Enter the name of the channel, select OK.

When an application using a browser connection is sending or receiving data, it may interfere with the radio.

When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio switches back on.

■Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel,

select or , or press the headset key. To select a radio channel location, briefly press the corresponding number keys.

Select Options and from the following options:

Switch off—Turn off the radio.

Save station—Enter a name for the channel, and select OK. Select one of 20 locations to save the channel location.

Stations—Select from list of current saved channels on your phone. Select Options > Delete station to clear channels or Options > Rename to rename channels.

Mono output or Stereo output—Listen to the radio in monaural mode or in stereo (default). Stereo output is available through a stereo enhancement.

Headset or Loudspeaker—With the headset attached, listen to the radio through a headset or the loudspeaker.

Set frequency—Manually enter the frequency of a known radio station, and select OK. You can also press * to set a frequency.

You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.

■Voice recorder

You can record pieces of speech, sound, or an active call for up to 3 minutes. The recorder cannot be used when a data call is active.

43