Panasonic 6275I manual Save information, Select a calling card, Make card calls

9251758_6275i_1_en_au_oth_v1.0.fm Page 49 Tuesday, August 22, 2006 10:24 PM

Save information

1.In standby mode, select Menu > Settings > Call > Calling card.

2.Enter your security code, and select OK. See “Security”, p. 59.

3.Scroll to the calling card of your choice, and select Options > Edit > Select > Dialling Sequence.

4.Select one of the following sequence types:

Access+phone+card—Dial the access number for the calling card, the phone number, then enter the card number (plus PIN if required).

Access+card+phone—Dial the access number for the calling card, card number (plus PIN if required), then enter the phone number.

Prefix+phone+card—Dial the prefix (numbers that must precede the phone number) and phone number, then enter the card number

(plus PIN if required).

5.Enter the required information (access number or prefix and card number), and select OK to confirm your entries.

6.Select Card name > enter the card name > OK.

S e t t i n g s

Select a calling card

You can select one of the calling cards for which you have saved information. The selected card information is used when you make a card call.

1.In standby mode, select Menu > Settings > Call > Calling card.

2.Enter your security code, and select OK. See "Security settings,"p. 80.

3.Scroll to the calling card of your choice, and select it.

Make card calls

After you have selected a calling card, make a card call.

1.Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

2.Press and hold the send key for a few seconds until Card call is displayed.

3.Follow the instructions on the screen.

4.When you hear the tone or system message, select OK.

49