●Answering system memory may be full. Erase some messages.
●You may have accidently pressed the play/stop button during playback and stopped the message.
Won’t respond to remote commands
● You must use a |
(rotary) dialing. |
In the box
●Base (x1)
●AC power adaptor (x3)
●Handset Charging unit (x2)
●Handset (x3)
●Handset battery pack (x3)
●Battery compartment cover (x3)
●Line cord (x1)
●User guide (x1)
● | Make sure to enter the correct security code. |
● | Did unit hang up? If you take no action for a period of time, it automatically |
| hangs up. |
Poor wireless reception (possible causes for poor reception)
●Aluminum siding.
●Foil backing on insulation.
●Heating ducts and other metal construction that can shield radio signals.
●You’re too close to appliances such as microwaves, stove, computers, etc.
●Atmospheric conditions, such as strong storms.
●Base is installed in the basement or lower floor of the house.
●Base is plugged into AC outlet with other electronic devices.
●Baby monitor is using the same frequency.
●Handset battery is low.
●You’re out of range of the base.
Product maintenance
To keep your unit working and looking good, follow these guidelines:
●Avoid putting the phone near heating appliances and devices that generate electrical noise (for example: motors or fluorescent lamps).
●DO NOT expose to direct sunlight or moisture.
●Avoid dropping the unit and/or other rough treatment.
●Clean with a soft cloth.
●Never use a strong cleaning agent or abrasive powder because this will damage the finish.
●Retain the original packaging in case you need to ship it at a later date.
●Periodically clean the charge contacts on the handset and base with a soft cloth.
19
Telephone jack requirements
To use this phone, you must have an RJ11C modular telephone jack. If you do not have a modular jack, please call your local telephone company to find out how to get one installed.
Modular Telephone
Line Jack
Installation
Digital Security System
Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances.
Certain other communications devices may also use the 1.9 GHz frequency for communi- cation, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 1.9 GHz frequency for communication include wireless audio/video senders, wireless computer networks,
Important installation information
● Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight.
● Avoid areas of excessive dust, moisture and low temperature. ● Avoid other cordless telephones or personal computers.
● Never install telephone wiring during a lightning storm.
● Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
● Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.
● Use caution when installing or modifying telephone lines. 4