Emerson EM6113 manual Phonebook, Answering machine

Area code

Press the MENUOK button. Select HANDSET using			/	and press the MENUOK button.
Select AREA CODE using	/	and press the	MENU	button. Enter the area code using
key pad and confirm with the		button.	OK
	MENUOK

Phonebook

You can store up to 50 entries in the phonebook.

Storing an entry

The handset in the idle state.

Press the MEMORY button. The first entry is shown in the display. If the phonebook is empty, EMPTY will be displayed.

Press the MENUOK button. Select NEW ENTRY if necessary and press the MENUOK button. Enter the name and press the MENUOK button. Enter special characters and spaces by pressing the “1” button. Enter the telephone number. Press the MUTE button to delete the last character or press and HOLD the MUTE button to delete the whole entry. You can enter a dialling pause (approximately 3 seconds) by pressing the REDIAL button.

Dialing from the phonebook /viewing entries

The handset is in idle state

Press the MEMORY button. Select and entry. Press the MEMORY button repeatedly, to show the telephone number and the melody.

Press the TALK button. The displayed telephone number is being dialed.

Editing an entry

The handset is in idle state
Press the MEMORY	button.
Press the MENUOK	button. Select EDIT ENTRY, using the ◄ or the CID		button, and press
the MENUOK button. Edit name if necessary and press the MENUOK button. Edit number if
necessary and press the OK		button. Change melody and press the	MENUOK	button.
	MENU
Press the MUTE	button to delete the last character or press and HOLD the MUTE			button to

delete the whole entry. You can enter a dialing pause (approximately 3 seconds) by pressing the REDIAL button.

Press the MEMORY button again to store the edited entry.

Deleting entries

When the desired entry is displayed, press the		MENU	button. Select DELETE ENTRY
		OK
or DELETE ALL if necessary and press the MENUOK		button. The entry or all entries will be
deleted.	15

5.Allow the phone to charge for 16 hours prior to first use. If you don't properly charge the phone, battery performance is compromised

CAUTION: To reduce the risk of personal injury, fire, or damage use only the EM6113 power adaptor listed in the user’s guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position.

Answering machine

The integrated digital answering machine offers a total recording time of up to 11 minutes for outgoing and incoming messages. Self recorded memos are treated like messages. You can operate the answering machine at the base station. An internal voice will give you advice. You can switch the language from German to french. Using a telephone with tone dialling (DTMF) you have also a PIN protected remote access.

You can select between two mode:

-Answer and record

-Answer only

A standard announcement is already saved for every operating type at the delivery stage. Therefore the answering machine is immediately operational. At “Answer and record” and reaching of the maximum recording capacity the device will automatically switch to the operating type “Answer only”.

If the answering machine is turned off the announcement for the operating type “Answer only” will be played after approx. 10 rings.

When playback messages the voice will give you information about day and time of the relevant call (only when date and time were set correctly).

The display gives you information:

XXDigits steadily on: Number of old (already heard) messages Flashing digits: Number of new messages.

FL TAM memory is full.

Turning the answering machine on/o￿

Press briefly .

Number of rings - setting /checking

The number of rings after which the answering machine will answer calls can be set from 2 - 9 and tS (toll saver). The standard setting is 5 rings. In toll saver mode, the machine will answer after 5 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely, you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.

Press briefly to check the setting.

Press and HOLD	to enter setting mode. Use the	and	to set the number
of rings.

Press for confirmation.

8