Emerson MP2-115HW user manual

Page 6

! CAUTION

This device receives power from multiple sources. Before servicing this device, remove all connections and cut power from the utility branch input. Before servicing the UPS, follow “Maintenance of UPS” instructions in the user manual for your UPS.

! CAUTION

This device is for use in a clean, temperature-controlled, indoor environment that is free of conductive contaminants. Route power supply cords so they are not walked on or pinched in any way. Refer to Specifications on page 15 for environmental conditions.

! WARNING

When the 2U Hardwire POD is in utility position (maintenance bypass mode) the power to the connected load is not filtered or conditioned by the UPS. The Liebert UPS connected equipment guarantee is not valid while in this mode of operation.

2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Power Output Distribution Volt Page Table of Contents Figures Important Safety Instructions Page Glossary of Symbols System Description Introduction and System DescriptionRack Mount Installation LoadInstallation on GXT 2U UPS Attaching POD securing brackets to rear of UPSElectrical Installation Considerations Hardwire ConnectionsElectrical Connections Rear ViewWiring Instructions Apply Feed Power Attaching POD to securing bracketsStart Equipment Indicator Lamps UtilityUPS Available Transfer to Maintenance Bypass Transfer to UPSOperation Troubleshooting Problem Cause SolutionProduct Warranty Registration SpecificationsPage Page 2U Hardwire POD
Top Page Image Contents