Advanced Features
Sending a Status Message
After selecting both a Status Message and a desired target ID, press the PTT button to send the message. Two high pitched tones will be heard during transmission.
If successful, two high pitched tones will be heard to indicate the message was successfully delivered to the target portable.
If unsuccessful, an alert tone will be heard to indicate that the targeted unit is busy,
In either case, the portable will return to the status screen after 3 seconds.
a b
Successful
a b
User Not
Available
Exiting the Status Message Function
Press the mkey to exit the Status Message screen. Pressing the “Exit” option key from the Status Message screen will also allow you to exit the status message function.
Receiving a Status Message
The portable will receive a message along with alert tones. To silence the recurring alert tones only, press any key except mor the “Clear” option key. In case of a
If a
All calls remain blocked until this message is cleared.
a b
At Lunch
Clear
ID List Programming
Feature menu #26 allows you to program ten status messages, each up to 12 characters long.
a b
26=Sts Mesg List Program
Exit Ok
41