Selecting a Status Message Using Memory Scroll
You can select Status Messages by using the lor rkeys to scroll through the ten named (aliased) Status Messages which you have programmed.
1.Press runtil you find the message you want. In
this case we scrolled to the Status Message “At | a | b |
Lunch”. | Sts Message |
|
2. Press “Ok”. | At Lunch |
|
|
|
3. Press “Targt” to select a target for this message. | Cancl | Ok |
Selecting a Target by Direct Entry
1.Enter the numeric ID of the person to whom you are sending the message.
2.Press “Ok”.
3.Press the PTT button to send the message to the selected ID.
a b
Sts Target 5= Rochelle
Cancl Ok
Selecting a Target by Memory Scroll
You can select a target by scrolling though the portable IDs or aliases by using the lor rkeys.
1.Press the rkey until you find the person to whom
| you want to send the message. | a | b |
2. | Press “Ok”. | Sts Target | |
3. | Press the PTT button. The display shows the mes- | Julie |
|
|
| ||
| sage that has been sent. | Cancl | Ok |
Selecting a Target by Alpha Search
You can select a portable ID by selecting the first letter of the name (alias). If no name is stored under a letter, the unit will automatically search forward, alphabetically, until the next name is found.
1.Press the “Name” key.
2. | Press a numeric key. i.e.: Press 7three times to | a | b |
| view the names (aliases) that begin with the letter | Name:Sts |
|
| R. | R=Randy |
|
|
|
| |
3. | Use either the lor rkeys to scroll to the name | Cancl | Ok |
| (alias) who is to receive the Status Message. |
|
|
4.Press the PTT button. The display shows the message that has been sent.
www.mot.com/iDEN
40