1.Position the accessory connector so that its coiled cord extends from the bottom of the por- table and its latch is on your left.
2.Insert the RSM’s accessory connector into the bottom of the portable (push both tabs on the accessory connector when inserting into the por- table).
3.Push the accessory connector firmly against the portable to make sure it is held in place. 4.Attach the smaller end of the
6.Adjust the cord length in the smaller end of the cable restraint clip until it is comfortable.
Operation
Please read the safety information contained in the user’s guide supplied with the portable before operating this equipment.
The remote speaker/microphone (RSM) only operates when the portable is in the
Wearing the RSM
For optimum performance from your RSM, wear the radio and RSM so that the accessory cord will not cross over or touch the antenna. Also, try to wear the radio and accessory combination fairly close to each other to avoid strain on the accessory connector.
Receiving:
When the RSM is connected to the radio’s bottom accessory connector, the radio’s speaker is muted, and the audio is only heard from the RSM speaker. Similarly, when a secondary receiver audio accessory is plugged into the 3.5 mm audio jack, audio to the RSM is rerouted to the secondary accessory.
Transmitting:
Connecting the remote speaker/microphone to the radio does not disable the radio’s microphone and PTT button.
www.mot.com/iDEN
66