Panasonic SL-DZ1200 Display indicator, Displaying the remaining time, Changing the display angle

Page 11

Display indicator

Displaying the remaining time

While playing a CD, SD Memory Card

Press [•REMAIN –AUTO CUE]

•“REMAIN” appears and the remaining play time of the track is displayed.

•Pressing again will return the time display to its original state.

•When you are playing a MP3 file from a CD-R or CD-RW the remaining play time will not be displayed if you press [•REMAIN –AUTO CUE].

•When there is less than 30 seconds of time remaining, you are notified by the flashing time display. With a MP3 file from a CD- R or CD-RW, the time display flashes if there is less than 7 sec- onds of time remaining. However, depending on the operation, the flashing indicator in the display may not appear.

Changing the display angle

You can rotate the display angle corresponding to the way the unit is setup.

Press [•DISPLAY ANGLE –FUNCTION] to select the dis- play angle

•The angle of the display rotates 90 degrees clockwise each time the button is pressed.

•The setting remains in memory even when the power is turned

off.

Adjusting the display contrast

1.Press and hold [•DISPLAY ANGLE –FUNCTION] for about 2 or more seconds until the display changes

•“CONTRAST” is selected in the display.

2. Press [– ], [+ ] to adjust the display contrast

•Press [– ], [+ ] to change the display to the desired con- trast (adjustable range: 1-100).

•If no buttons are pressed for more than 5 seconds, the time dis- play returns to its original state.

•The setting remains in memory even when the power is turned off.

Displayed when using CD, SD audio

Displayed when using MP3 files on CD-R and CD-RW

Basic operations

Selected play media indicator

: Indicates CD is selected : Indicates SD is selected

Track number indicator

When using CD, SD Audio: Total number of tracks and the track being played is displayed

When using CD-R, CD-RW MP3 files:

Total number of tracks and the track being played within the album is dis- played

Current track position indicator

Change in tempo rate indicator

Auto Cue indicator

: Indicates Auto Cue is on

Cue bank indicator

REALTIME REC indicator

: Indicates the sample pad is in REALTIME REC operation

Beats per minute (BPM) indicator

Number of beats per minute, indicating track speed Depending on the music, the BPM may not be detectable, or may take time to be displayed.

Play time (Minutes, seconds, frames), remaining time (CD, SD audio) indicator

Remaining time (REMAIN) indicator

Displayed only for CD, SD audio

MP3 album number indicator

Indicated when using MP3 files

CD-MP3 (CD-R, CD-RW MP3 file) indicator

11

RQT7114

Image 11

Contents Direct Drive Digital Turntable Product service Table of contentsUse Listening cautionBefore use Important Safety InstructionsRear panel Main featuresControl panel Front panelRear panel Component part namesControl panel Front panelSetup Platter setupConnections Connecting with the DJ mixerConnecting with other mixers Listening with the headphonesConnecting to equipment with digital input terminals Connecting the control terminals for relay playConnecting with the stereo amplifier Not using the DJ mixer Inserting-removing a disc or SD Memory Card Changing the display angle Display indicatorAdjusting the display contrast Displaying the remaining timePlaying CD-R and CD-RW discs Auto Cue function Turntable mode onlyTurn Volume Playing a CD or SD Memory Card basic playInsert a disc or SD Memory Card Press Power OFF onSwitch Mode to Turntable Switch Play Select to select the me- dia to be usedAdjusting the auto cue level Basic function settingsUsing the Free Wheel mode Adjusting the platter brakeAdvanced Platter operationsChanging play with your hand Basic play for DJsReverse play Reversing the platter Changing tempo and direction of playChanging tempo Locking the pitchPlay from the stored point Setting the cue point at any pointSetting the auto cue point Playing from memoryStore desired points to memory and play loop play Playing from memoryStoring to the CUE Pads and playing Recording to the Sample Pads in real-time Select play mode and playRecording to the Sample Pads and playing Erasing cue pad, sample pad, loop play dataFormance Changing the soundChanging sound to simulate analog Change sound with combined perSave the data Saving to a SD Memory Card, RecallingSaving to a SD Memory Card Insert a SD Memory CardSD Memory Card Formatting the SD Memory CardRegarding MP3 albums and SD audio Recalling loading data saved on aUsing the amplifier and other equipment Using with other equipmentStart play using the mixer’s fader Using two units for relay playInitializing this unit’s memory Unit’s initialize memory functionGlossary Linking different tracksReference Handling SD Memory CardsConcerning CDs Question Answer Frequently asked questionsTroubleshooting guide Problem Cause SolutionTo clean this unit, wipe with a soft, dry cloth Error messagesMaintenance SpecificationsElectric Corporation of America Puerto Rico, Inc. PSC Panasonic/Technics DJ Products Limited WarrantyLimited warranty only for U.S.A